GREENGATE DS:3

15 posts / 0 new
Last post
stynx's picture
Offline
Last seen: 12 hours 35 min ago
Joined: Apr 19 2012 - 09:41
Posts: 223
GREENGATE DS:3
AttachmentSize
PDF icon AD207.67 KB
PDF icon mldinformat.pdf253.72 KB
PDF icon AD240.07 KB

Hi,

 

after years of searching, i have finally found a nearly complete Greengate DS:3 Synthesizer (missing the keyboard) for the Apple II.

I will make images from the disks and scan the manual, as soon as the card arrives.

stynx's picture
Offline
Last seen: 12 hours 35 min ago
Joined: Apr 19 2012 - 09:41
Posts: 223
The chip with the marking

The chip with the marking 862130 has some intersting text on the underside ;-)

 

Lee Adamson's picture
Offline
Last seen: 3 years 10 months ago
Joined: Oct 11 2018 - 22:53
Posts: 92
I can't read French, but if

I can't read French, but if this thing uses regular old-school 9600 baud serial MIDI, then you ought to be able to use about any MIDI controller for the keyboard, assuming you can make the right cables.

 

So is this card a sampler, a synthesizer, or both?

macnoyd's picture
Online
Last seen: 16 min 52 sec ago
Joined: Oct 15 2012 - 08:59
Posts: 854
Looks like he was trying to scratch out Korea

Looks like he was trying to scratch out Korea. (for whatever reason)

stynx's picture
Offline
Last seen: 12 hours 35 min ago
Joined: Apr 19 2012 - 09:41
Posts: 223
Lee Adamson wrote:I can't

[quote=Lee Adamson]

I can't read French, but if this thing uses regular old-school 9600 baud serial MIDI, then you ought to be able to use about any MIDI controller for the keyboard, assuming you can make the right cables.

 

So is this card a sampler, a synthesizer, or both?

[/quote]

 

The midi feature is missing on this card. It was available as an addon card.

 

The card shown offers 4 sampler channels with 15khz/8bit. There is a 16pin header that allowed the direct interfacing of a musical keyboard. The main feature is the ability to sample directly from an analog source via the audio in with 30khz/8bit. Each sample could be several Kilobytes long (at least long enough to sample the word 'panties' :-) ). I havent been able to play with the card just yet since im missing the actual software. The previous owner had left it in the disk drive of the A2 but is sending it to me in the next days.

-Jonas

DS3 manual applications guide.pdf

DS3 manual keyboard guide.pdf

DS3 manual users guide.pdf

stynx's picture
Offline
Last seen: 12 hours 35 min ago
Joined: Apr 19 2012 - 09:41
Posts: 223
My current data for the

My current data for the Greengate DS:3 on archive org.

https://archive.org/download/greengate_ds3/greengate%20DS-3/

CVT
CVT's picture
Offline
Last seen: 18 min 26 sec ago
Joined: Aug 9 2022 - 00:48
Posts: 1147
Warning: the link in the

Warning: the link in the previous post contains a virus. Do not click!

 

This refers to a deleted post. - Tom

Offline
Last seen: 6 months 5 days ago
Joined: Apr 9 2022 - 17:05
Posts: 58
That's a fantastic find,

That's a fantastic find, congrats. I don't suppose anyone has ever found a way to reproduce that ASIC(?)

Offline
Last seen: 6 hours 17 min ago
Joined: Feb 27 2021 - 18:59
Posts: 584
Sanded chips

It looks more like the part numbers on the component were sanded off to prevent cloning the board. If it was truly a proprietary chip, that wouldn't be necessary as the company would control all supplies of that chip. So sanded chips are never proprietary and always commodity parts. Could be a DSP. Ferranti ULAs (mask gate arrays) were available in 40-pin DIPs but why sand a chip that you control supplies of?

The ADC and the DACs are the Ferranti chips. ZN448 is an 8-bit ADC and the 4x ZN428 are 8-bit DACs.

Offline
Last seen: 6 months 5 days ago
Joined: Apr 9 2022 - 17:05
Posts: 58
That makes sense. Maybe a

That makes sense. Maybe a microcontroller too. Has anyone made a schematic for that card? should be doable if that front layout in the archive is accurate

Offline
Last seen: 6 hours 17 min ago
Joined: Feb 27 2021 - 18:59
Posts: 584
ports

You can almost see the PA and PB ports of the VIA going directly to the sanded chip. Did anyone read all those manuals and know what the IDC connector above the VIA is for? That could be a clue. Are the samples stored in the Apple, or does it keep them in board RAM (easier to vary pitch/speed that way).

Offline
Last seen: 6 months 5 days ago
Joined: Apr 9 2022 - 17:05
Posts: 58
You're correct, all sixteen

You're correct, all sixteen PA and PB lines go to the IDC connector, which has to be for the keyboard. I read that it's supposed to work just like a regular computer keyboard, so I'm sure that PA and PB form a simple X and Y matrix for up to 64 keyswitches.

 

Here's part of how the unknown chip seems to be connected. The address lines are connected to the Apple II bus with bidirectional transceivers, and it generates its own R/W signal, so it seems to be capable of doing DMA. I think it's gotta be a microcontroller. Anyone familiar with this pinout?

 

 

 

Offline
Last seen: 6 hours 17 min ago
Joined: Feb 27 2021 - 18:59
Posts: 584
no luck so far

I checked some possible chips like the NS32008, AM2901, AM2910, Ferranti ULA, but they don't have VCC and Gnd on those pins.

Maybe the chip is a DMA controller or CRTC? It would need to be able to emit addresses onto the bus if samples are stored in Apple memory.

stynx's picture
Offline
Last seen: 12 hours 35 min ago
Joined: Apr 19 2012 - 09:41
Posts: 223
The mystery chip seems to be

The mystery chip seems to be a MC6844 DMA controller (based on a post on Facebook from Bea Thurman).

There seems to be a plan for a clone with the intention to publish the layout on github.
Offline
Last seen: 6 months 5 days ago
Joined: Apr 9 2022 - 17:05
Posts: 58
GoodGreat DS3

Can't see the facebook link, but Eric "TubeTime" Schlaepfer has released his clone, https://github.com/schlae/goodgreat-ds3

Log in or register to post comments