WTB/WTT: Daystar Universal Powercache

1 post / 0 new
Last seen: 17 years 2 months ago
Joined: Jan 19 2007 - 10:32
Posts: 57
WTB/WTT: Daystar Universal Powercache

I need to buy a Daystar Universal Powercache PDS accelerator. There is a difference between the powercache and the universal powercache. The universal powercache will have a P33 or P34 stamped on the lower left corner of the card. The non-universal will not. Here is a picture of the Universal Powercache:

You can see the P33 is in the lower left corner. Some may say P34. But if yours does not have a P33 or P34, then it is not universal and I do not want it.

I want to buy the 50MHz version, with the 50MHz 68882 FPU also present. If you have one without the FPU, please let me know anyway.

I could either buy the card from you, or do a painless swap with the non-universal type card, which is 50MHz and it has the 50MHz FPU. As far as I know, it should work with anything but the TwinSpark adapter, and I am not sure about the IIsi adapter because that is what the TwinSpark is based on. I can guarantee 100% it will work in a IIci, without any type of adapter.

If you are interested in a trade but your card does not have an FPU, I could pull the FPU from mine and pop it into yours when I got it. Please let me know.