I tried it today and yesterday,although I can input this file successful,but when I type received and type name,it show many codes,I don't know why?does anyone know?any way,do u know adf this software how to use.I can see .dsk inside files, but cannot put the disk or boot from apple2.what's next?what's wrong?
Bridged chat on:
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
No Social Media.
All Content Locally Hosted.
Two Terabytes and Growing.
Built on Free Software.
We have complied with zero government requests for information.
Have you successfully transferred the ADTPro client from your PC to the Apple II? Did you save it to a disk so you can boot the Apple II with it? If you've done this there should be no trouble transferring the disk images from your PC to the Apple.
If you've got everything hooked up right and the program transferred but are having trouble transferring other disk images you might want to look over the instructions on the ADTPro web page.
but instruction hasnot this explain,I use my old macintosh transfer to apple 2 version is MacADT 1.2.1.I donnot know if setup or anything.maybe I should look for another version.thx
What Macintosh do you have? See this page for really old ones:
I read this instruction and but something I donot understand,
Type "IN#2" and return-key; to set the standard input to modem port. So remember to stick your cable into the modem/printer port on your //c
Type "6B" and return-key; to set the speed to 300 baud.
Now stick a blank disk into the //c - we will use this to make a bootable ADT disk, but it also acts as insurance. At this point start "MacADT", and select "Send ADT Program..." from "Install" menu. Click "Start Sending" button to send "adt.dmp" to the //c. It takes its time, but your heart will be skipping as your screen starts to fill up with characters. After sending, click "End" button.
it is ok,I load this code successful.it show
send receive dir quit option
next I have problem,after load it I got this program
send receive dir quit
when I pressed s or c I got a word formating test disk
Once the file has transfered, type "BRUN ADT" and return-key to start the ADT program on the //c.
At this point the ADT prog has written itself to the blank disk in the //c - it is not bootable, but it is usable should you have an accident at this point (like i did)
If you mess things up and lose the ADT prog from the //c, reboot with the disk you just wrote in, it won't work, but will drop you at DOS. Just type BRUN ADT, and your prog is back.
I donot know why,how to do?does anyone answer me?
What Apple II do you have, exactly? Is it the clone you talked about earlier, or is it an IIc?
I use apple II C plus and apple 2 gs it is the result.db8 port communication old macintosh and apple 2
Two new questions:
1. Watch the Apple when the floppy disk boots. Does it say PRODOS anywhere? I want to know what the floppy was formatted with. I have a feeling it's ProDOS, and you're running the DOS version of ADT on it. But I can't be sure, because you never described where your floppy disk came from or what state it's in.
2. What is the version number of ADT that you're running? It scrolled off the screen when it crashed. Should be 1.21 or 1.33 or so.
I answer your question
when apple 2 boot.I use basic inside.like instruction.type IN#2 and 6B,then input it till end.
I use adt 1.33 this one acquire download from adt 2007_2 inside name is macadt.sit.because my disk drive has damaged.so I have no plug any disk drive.is it the reason?thx
Yes, that's the reason. Well, one of the reasons. The real reason is that ADT 1.33 is trying to ask DOS if you have a disk in the drive, but you have no DOS loaded!
Now I need to know what you expect to be able to do when you have no disk drive connected!
ok,I expect to use 3.5 disk drive to convert .dsk.because my 5.25 disk drive has damage I have no way.so I heard it can convert .dsk to 3.5 disk.so I try it.is it true?or need new version?how to set up it?thx
The Apple DOS version of ADT (and the MacADT server) won't work on 3.5" disks. Only ADTPro (with the ADTPro server running under Java) will transfer 3.5" disks.
But you have a different problem now. If you take a .dsk image that usually has a copy of DOS 3.3 on it and try to use it with a 3.5" disk drive - it will fail. DOS 3.3 is going to expect Disk ][ hardware, but instead there will be a SmartPort or similar device. So even if you write a 5.25" .dsk image to a 3.5" disk, it's probably not going to do what you want it to do. You really need to get a new 5.25" disk drive.
ok,thx for ur answer.I know the reason why,in other word.I use 5.25 and plug it to run adt 3.3 ,I can convert .dsk to 5.25 disk.I try it.but the probem is 5.25 disk is so few, if I want to buy it.it is so difficult,3.5 is so easily,so that is reason why I have convert to 3.5 disk.do u have another way to do it?
The only thing that comes to mind is Apple Game Server: http://a2gameserver.berlios.de/ .
It will run Apple II games without the need for a disk drive at all.
I have idea,it can transfer from macintosh to apple2,why donnot make any games .dsk to dmp and transfer to apple 2.that is good.