Apple II

Badge Emblem Logo Decale Label replactment for llGS FDD

Submitted by KLund1 on August 29, 2014 - 9:13pm

I got a IIGS with 2x3.5" and 1x5.25" floppy drives at a flea market.

Forums: 
Apple II

AppleWorks Question

Submitted by Here2Learn on August 22, 2014 - 3:21pm

I am trying to boot up AppleWorks. This is from copies I made of originals in 1985, so I think it is version 1.3 maybe. After the Startup disk, I put in the Program disk. I get the message:

Your copy of the AppleWorks PROGRAM disk must be in drive 1. The write-protect notch must be uncovered.

The copy has a notch on the side.

The system is:
enhanced Apple //e
AE RamWorks III
Apple Mouse Card in slot 4
I/O Controller card (Duodisk card) in slot 6
ZipChip 8Mhz
Apple Numeric Keypad
Duodisk

Forums: 
Apple II

ADTPro Virtual Serial function

Submitted by insanitor on August 21, 2014 - 7:07pm

I have had problems with this program, so I would like to try what is described as the, "Virtual Serial over IP" function as described here: http://adtpro.sourceforge.net/misc.html#Virtual_Serial

I am clueless on how to do this. I did not know which emulator to use so I shot in the dark and chose Applewin since it supports Uthernet emulation but I could not get any further than that since I could not find any REM entry on the batch file on ADTPro on how to start ADTPro with a "localhost" setting.

Any thoughts?

Forums: 
Apple II

IIGS and SCSI

Submitted by davval50 on August 21, 2014 - 6:01pm

I have a ROM 01 IIGS with a scsi card installed and connected to an external SCSI HD. I got a hold of a SCSI CD-ROM and connected it to the HD. I installed a terminator block
on the CD drive after connecting it to HD. Now the computer is behaving oddly. Sometimes it boots but almost just hangs up---frozen. The HD is the boot drive. I guess I don't know
much about SCSI. Any help would be appreciated.

Forums: 
Apple II

Understanding the Apple II mass storage

Submitted by protek on August 20, 2014 - 2:43am

I've been contemplating my options regarding hard drives for my Apple IIGS. There are quite a few alternatives available and the CFFA3000 and Focus IDE seem to be the most popular.

I currently have a Unisdisk Disk II/Smartport emulator in my IIGS and after having done a bit of research I've begun to wonder if that would be sufficient for me. There are a few things I'd like to get some clarification based on facts and experiences to help me make up my mind:

Forums: 
Apple II

Franklinstein on eBay??

Submitted by Here2Learn on August 17, 2014 - 12:43pm

What am I looking at? Is it a clone board in an Apple case??

http://www.ebay.com/itm/Vintage-APPLE-II-Computer-/311055104608?pt=US_Vintage_Computers_Mainframes&hash=item486c543a60

Forums: 
Apple II

Using peripheral connector I/O SELECT or DEVICE SELECT

Submitted by jaksel on August 15, 2014 - 12:51pm

I am working on an FPGA-based peripheral card for Apple II (currently tested in a IIe). This board in its current state works as expected but I wanted to add some I/O control to turn on and off features, so I decided that the DEVICE SELECT signal was the best choice. However it seems like I cannot activate the DEVICE SELECT signal!

Forums: 
Apple II

(null)

Submitted by computist on August 13, 2014 - 3:56pm

...

Forums: 
Apple II

IIgs CPU selection

Submitted by kevwaffle on August 12, 2014 - 5:34pm

I have a IIgs ROM 01 that I would like to use, but it is missing a CPU. I found something that may be compatible at mouser. Any reason why this wouldn't work? Thanks!!

http://www.mouser.com/ProductDetail/Western-Design-Center-WDC/W65C816S6PG-14/?qs=sGAEpiMZZMvu0Nwh4cA1wSNu7hWmGrIdZi%2fn4yhgYes%3d

Forums: 
Apple II

Found a Bell and Howell II Plus in it's box, practically new looking!

Submitted by Samm328 on August 8, 2014 - 11:16pm

Barn fresh! just found this awesome Bell and Howell!

Forums: 
Apple II

Pages

Subscribe to Apple II