Apple II

Will a Super Serial Card II that will work in an AIIe work OK in an AIIgs? The reason I'm asking is I bought a IIgs, and want to use ADTPro with it. I've read the manual, and it says some cards will and some won't. I hope the SSC II is one of the ones that works Thanks.

This IIgs caught my attention, since it looks like a IIe -> IIgs upgrade board in a regular IIgs case (due to the connectors on the motherboard). I can't identify the card. It looks like it might be some kind of multifunction card with floppy connectors. The auction says it is a SCSI card, but not one that I recognize. Just curious.

I am also a big Amiga user, and I use compact flash for my hard disks. I have one of the CFFA3000's on order. For my Amiga, I can use WinUAE, and install the OS onto the CF using the CF reader in my PC, then just move it over into the Amiga, and it runs like it was installed in the real Amiga. Can I do this with an emulator, for an Apple IIGS, or an Apple IIE? Put the CF in my PC, run an emulator, and install everything, then just put the CF in my Apple, and be done? Thanks.

Hey everyone, I'm new to Apple, as I picked one up locally with the green monitor w/tilt screen, duodrive, 64k/80 column card. It worked, but had problems, wouldn't pass diag. I did some poking, and found the small chip just to the left of the ram had a broken lead, and I suspect it had some bad ram chips. Re-seating didn't help. It was a MB manufactured in 1982, and when booted, showed 'Apple ]['. I found a 1984 MB on ebay, tested, passing diags, for $20, so I bought it. I changed the MB, and it works great. Now, when I power it up, it shows 'Apple ][e', instead of just 'Apple ]['.