Apple II

Hey guys , I was messin around with my Super Serial Card II the other night , and I forgot to write down the Dip Switch Settings for use with ADT. Which ones ON and OFF , can someone please tell me which ones to use again.. The card resides in SLOT #2 on my //e.

Thanks..

Patrick.

When I got to format a disk on ADT pro, any disk I put in drive 2 shows up as I/O error. It will format them still, but even a disk that has stuff on it or when the drive is empty it still says I/O error. Both drives won't format side two of any floppy either; I get a * sign What could cause this?

I've been working on a project to get an old Apple II clone running again. It is called "MICRO II". I've been working with another guy that has been having me probe about every chip on the board for shorts and now that we have that taken care of, we are now down to the ROM card. He asked me if I knew anyone with a EPROM programmer and offered to look at it for me but the problem is that he is over in Australia and I'm over here in Florida.

I currently have no need for these parts, but am posting this in case someone on the list needs a couple.

These babies are used in the first and second generation Apple ][ keyboards. Those are the keyboards without the separate plug in encoder board. MM5740 keyboard encoders are very sensitive to static electricity and can be easily destroyed. Replacements are extremely hard to come by, but while searching around for Apple 1 parts, I noticed a business in the UK that is listing them as in stock.

http://www.littlediode.com/components/MM5740AAE_N.html