Apple II

Applied Engineering: The Conserver for GS

Submitted by Jim_GS on July 7, 2013 - 10:58am

I recently experienced a power surge that blew the fuse for my AE GS Conserver. I removed the fuse and found that it had absolutely no ID markings on it at all....never saw a fuse without some ID before? Does anyone know the correct fuse to use with the Conserver?

Thanks
Jim

Forums: 
Apple II

Need this screw

Submitted by tkh on July 4, 2013 - 3:01am

I have a simple question.
I recently have purchased some components for my A2e.
The problem is I don't have the right nut and bolt to attach these to the back.

With this post, I have attached a picture of the screw that I need along with a quarter for size comparison.
Please help me identify this with name and place where I can possibly get them.

Thank you

Forums: 
Apple II

Apple IIe SCSI card device support

Submitted by tkh on July 3, 2013 - 1:17am

Hi, I have an Apple IIe (first release). Recently, I got a SCSI card (NOT hi-speed) and trying to make use of it.

Forums: 
Apple II

convert Apple IIe or IIc keyboard to USB

Submitted by option8 on July 1, 2013 - 11:37pm

Now available: RetroConnector keyboard shield for Apple //c and //e.

Turn the built-in keyboard of your classic Apple II into a USB keyboard.

Forums: 
Apple II

Connect a USB keyboard to your Apple //e

Submitted by option8 on July 1, 2013 - 11:32pm

Now available on Tindie: RetroConnector USB Interface.

Connect a USB keyboard to your Apple //e

Forums: 
Apple II

The 1 Gig IDE Drive to CFFA 3000 Project

Submitted by gsmcten on June 29, 2013 - 6:22pm

I'm a little awkward when it comes to doing things with electronics. Anyone who has read the Mountain Expansion Chassis posts will know that.

The main Idea here is to connect a 1 Gig IDE hard drive to the CFFA 3000 in my Apple IIe.

1. I have the CFFA Card and the drive.
2. I have a complete USB to IDE Adapter Kit.

Here is the problem:

Forums: 
Apple II

Strange iie problem part II

Submitted by insanitor on June 27, 2013 - 9:57pm

This iie is driving me nuts.

Yesterday, I left the iie on for two hours, then I played that game, saved it, then loaded up the same game and all was well.

Today, when I turned on the iie for the first time, the disk drive would not turn on. I switched it off and then back on and it turned on fine.

So, I leave it on for another two hours, played that game again, saved that game, and reloaded the same game and it worked fine.

Forums: 
Apple II

Apple IIe Problem: Z80 card + Transwarp block boot

Submitted by tkh on June 27, 2013 - 2:14am

Hi, I have a curious problem with my Apple IIe on my hands.

I just got my Transwarp and Z80 card at the same time. I installed both of them one after another on the same day that I had it.
Then I tried to run it. What happened was the Transwarp logo came out, and nothing followed. The system just stuck right there.

Forums: 
Apple II

Apple ///+ Power Supply

Submitted by ScutBoy on June 26, 2013 - 3:23pm

Apple ///+ Power Supply - interchangeability or repair?

Forums: 
Apple II

Unknown 80 column card

Submitted by freitz on June 26, 2013 - 11:18am

Hi,
I recently got an Apple II Europlus with an 80 column card marked "Ananas 80Z" (that's pineapple in german).
My main problem is that the onboard relay for switching the output to the 80 column screen is activated, as soon as the cards video connector has a ground connection. It has two eproms labled "DIN" and "ASC" wich is obviously the german and the us font sets, but I don't know how to switch between them. The card works when I do a "PR#3" but some graphics are scrambled, because it uses the german font set.

Forums: 
Apple II

Pages

Subscribe to Apple II