Apple II

Need help to indentify this slot card

Hi -

 

In my Apple IIe, which I did acquire used, there is this slot card I can't identify:

 

Forums: 

ADTpro and Apple Super Serial Card

Hey, I just recently picked up an Apple ][+ from eBay and have been looking forward to loading software onto it, unfortunately the disc drive didn't seem to work properly and would boot anything. So, I've been trying to troubleshoot by using Adtpro with my super serial card to see if I have any problem with the disc drive then. Unfortunately, this also did not seem to work, I could only choose the COM4 slot and not 1, 2, or 3.

Forums: 

Is there a guide to fitting an Apple IIGS into an Apple IIe shell?

Is there a guide to fitting an Apple IIGS (ROM 1) into an Apple IIe shell? Any sort of tutorial? I would like to do the IIGs Stealth conversion.  I'm aware that Maceffects sells a clear case with a conversion kit (which I'm not sure what it's comprised of), but I'm not really interested in the clear case because I own an Apple IIe already and could use that. How hard is this project? Would I need to drill the screw holes myself? Would my Garret's Workshop RAM2GS II still work inside that shell?

Forums: 

Seriously, how do I get an Apple IIGS?

I'm finding the prices on eBay quite harsh, are you guys in the know of how I could buy an Apple IIGS? I'm not sure why everything on eBay is ridiculously overpriced.

Forums: 

Apple IIe Alps keyboard issues

Hello,

 

Forums: 

Unable to start up from memory card || Apple IIe Enhanced

I started up my Apple IIe and it's printing garbage to the screen. 

I reset it and it says "unable to start up from memory card."

When I move the memory card to a different location, in this case, slot 5, the computer boots to "Apple \\e". I type PRINT PEEK(64447)+PEEK(64448)*256 and it returns 57344. When I put the card back into slot 7, it says unable to start up from memory card. PRINT PEEK(64447)+PEEK(64448)*256 still returns 57344. So, in slot 5 the computer doesn't even see the card. In slot 7, it sees it but is unable to load from it.

Forums: 

Unitron 2200 CP/M disk

G'day from down under.

 

I have got my Unitron 2200 with Dual CPU's going and loading ProDos, but when I try to load Softcard CP/M, it does nothing.  I have checked all the IC's for the Z80 section on my TL866 and they are good, the Z80 is good, and visually it looks like a Softcard implementation, but it wont load.

 

I am using a Apple to PS/2 Keyboard adaptor, but I don't think this should effect anything.

 

Does anyone know if the Unitron ran a different version of C/PM? 

 

Forums: 

Glen Bredon's DOS.MASTER for ProDOS Drives

Moving the discussion about compatibility problems with the "DOS.GAMES" collection (see previous discussion here) to this separate thread. It's not a DAN][-specific topic, and the other thread is getting incredibly long anyway. Makes sense to spin off sidetrack discussions...

Forums: 

16KB RAM expansion on Apple //e

Hi there,

For testing purposes, can the below 16KB card from an Apple II+ work on an Apple //e? I would just like to test the RAM on it. It doesn't seem to be working but I don't know if it's because it's broken or not :)

Thanks!

Forums: 

Apple ][ Plus Troubleshooting or Documentation

Hello Everyone,

 

I have received an Apple ][ Plus. When I turn it on, it only shows "APPLE ][" on the screen. No blinking cursor. Is this a problem? Typing doesn't appear to do anything. I don't have any software disks to try and boot using. Also, if there is any place that you can direct me to that would have documentation that I can use to understand how to use this computer would be wonderful.

 

Thanks,

 

Courtney

Forums: 

Pages

Subscribe to Apple II