Help! I seem to have broken my Intel Mac Mini

20 posts / 0 new
Last post
Offline
Last seen: 18 years 9 months ago
Joined: Mar 8 2006 - 05:22
Posts: 2
Help! I seem to have broken my Intel Mac Mini

Wanted to install more ram. So, I took it apart...

Everything went fine, manahed to take the main cover off fairly easily. Then I unscrewed the 4 main screws. When I lifted the top (hard drive and DVD drive secion) the orange plastic that that links then ripped apart...

Needless to say the damn machine don't boot.

chris501's picture
Offline
Last seen: 14 years 9 months ago
Joined: Apr 5 2005 - 04:35
Posts: 232
cable or board?

do you mean that orange, flexible cable or that board attached to the cd-drive? however, go and order a new one at your local apple store. it will cost you a bit, since apple won't replace it under warranty Wink

ps: see here for instructions on how to disassemble the mini:

http://www.applefritter.com/Mac_Mini_Take_Apart_Guide

Offline
Last seen: 18 years 9 months ago
Joined: Mar 8 2006 - 05:22
Posts: 2
Yes, thats the one!!!

Yeah, the oraneg cable!!!

So, do you reckon this is the reason why nothing apperas on the display? I mean everything comes on, cd spins etc... Im going nuts!

Tom Owad's picture
Offline
Last seen: 14 hours 20 min ago
Joined: Dec 16 2003 - 15:14
Posts: 3384
If it's the flexible cable in

If it's the flexible cable in the last picture of that article, then the only ill effect of not having it connected should be that you'll have no sound.

zmatt's picture
Offline
Last seen: 18 years 7 months ago
Joined: Jan 22 2006 - 17:25
Posts: 35
he might not have grounded hi

he might not have grounded himself and fried the mobo too.

Whosawhatsis's picture
Offline
Last seen: 17 years 6 months ago
Joined: Aug 28 2005 - 01:49
Posts: 66
Ouch. Torn FFCs really suck.

Ouch. Torn FFCs really suck. I've got more than a few devices that have been completely bricked because of them, and others that have only diminished functionality. I wish there was an easy way to splice them back together, but there isn't, and replacing them more often than not means buying a replacement for the expensive components that they connect to. There are home PCB-etching techniques that could theoretically be used to produce replacements by scanning the pieces, photoshopping them back together, and printing them, but I don't know of any source for the raw materials needed to create a cable instead of a board.

MacTrash_1's picture
Offline
Last seen: 17 years 7 months ago
Joined: Dec 20 2003 - 10:38
Posts: 318
Mini cable disconnected

I just got a 1.5GHz Single Core Mini and did the same thing when adding RAM. I even read this thread before doing the upgrade ! Be very very careful when taking the Intel Mini apart. The ribbon cable pops out way too easily. I don't even know how it happened but it did.

I guess it time to get the wallet out......

Offline
Last seen: 7 years 9 months ago
Joined: Feb 23 2005 - 05:27
Posts: 233
Not so legal suggestion

If you just bought the thing, bring it back and say that you NEVER touched it. EVER, you took it out of the package, went to boot it up and blammo, no workie. Pleading ignorance usually works...you are a mac user after all and my experience with tech support for mac stuff is that they tend to think their users aren't the most technically inclined folks. Lying sucks and all, but so does replacing a part that should be out of your way for a user configurable upgrade. it's simple design sense. If you allow your customers to upgrade their boxes, you should design it so they can without stuff like that. Otherwise, you're running the risk of being accused of all sorts of stuff as a company.

madmax_2069's picture
Offline
Last seen: 14 years 2 weeks ago
Joined: Sep 24 2005 - 07:28
Posts: 664
why would they put such a fli

why would they put such a flimsy part in the mini in the first place since you have to remove it to install ram. i think it should be noted as a design flaw . if ram is a user's right to install they should have made that cable better so user's could remove it without the fear of ripping it.

DrBunsen's picture
Offline
Last seen: 10 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 946
right

on the Intel Minis, RAM is not listed as a user replaceable part.

Offline
Last seen: 7 years 9 months ago
Joined: Feb 23 2005 - 05:27
Posts: 233
non upgradeable ram?

Is that still legal? It seems that a few companies got in trouble for that a few years ago.

Also, even if the ram ISNT upgradeable, you've got to go through the same steps for ANY user upgrade, and that part runs the same risk.

This bodes very poorly for apple's future in the upcoming computer market...course there are those of us that believe that's not a concern for the sartorially challenged and personality damaged Mr. Jobs

eeun's picture
Offline
Last seen: 1 year 8 months ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
After the initial G4 mini rel

After the initial G4 mini release and subsequent kerfuffle about upgrading memory vs. warranty, Apple did state that - for that first model at least - users could upgrade their memory without invalidating the warranty.

If you break something else while performing said upgrade, well...

Read your warranty and see if you're covered.

Of course, y'all should have done that *before* you did the putty-knife fandango.

madmax_2069's picture
Offline
Last seen: 14 years 2 weeks ago
Joined: Sep 24 2005 - 07:28
Posts: 664
well i thought adding ram was

well i thought adding ram was a user upgradeable part. no matter they should not put a part in the mini that is just cheap on apples side

DrBunsen's picture
Offline
Last seen: 10 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 946

90%* of end users never upgrade anything in their machine, even the OS, they just trade it in and buy a new one. Repeat after me, power users are -not- Apple's target market for the Mini

*(wild guess based on some figure I read yesterday I can't remember exactly. But it was high)

Eudimorphodon's picture
Offline
Last seen: 3 weeks 1 day ago
Joined: Dec 21 2003 - 14:14
Posts: 1207
Re:

90%* of end users never upgrade anything in their machine, even the OS, they just trade it in and buy a new one. Repeat after me, power users are -not- Apple's target market for the Mini

*(wild guess based on some figure I read yesterday I can't remember exactly. But it was high)

RAM is the one thing Mac users tend to upgrade. (Many a PowerMac spends its whole life with empty PCI slots, but it probably gets RAM stuffed into it at some point.)

I really fail to understand why Apple didn't design the Mini with a little hatch on the bottom for adding RAM. At worst laying the RAM sockets flat along the bottom of the motherboard like a laptop would of increased its height by a 1/4 of an inch. (Of course, if they'd done that they wouldn't of had to allow for the height taken up by standing the RAM vertically, so there's a good chance the net result would of been *zero* external form-factor change.)

--Peace

iantm's picture
Offline
Last seen: 3 years 9 months ago
Joined: Apr 2 2005 - 14:01
Posts: 709
The mini's mission

is to be a disposable mac. By making the machine non end user friendly, Apple is throwing the little guy (apple resellers and shops) a bone. Considering that the profit margin for a reseller on a mini is razor thin, they need to make money somehow. Labor on a ram upgrade is an easy way to do it. Then again, I've never been too big of a fan of the mini. For most people I've seen wanting one, an iMac or an iBook/PowerBook is a better alternative.

Frankly, the mac mini is what I consider to be the first disposable desktop mac. Just toss it when you're done with it. It's been pre shrunken so it doesn't take up much space at the landfill. Considering the fact that the independant apple shops are gradually being squeezed out of existence, is it really so much to pay a little bit extra to have it put in by the shop and have damage be their liability?

MacTrash_1's picture
Offline
Last seen: 17 years 7 months ago
Joined: Dec 20 2003 - 10:38
Posts: 318
Re: well i thought adding ram was

well i thought adding ram was a user upgradeable part. no matter they should not put a part in the mini that is just cheap on apples side

RAM upgrade on the Mini is User servicable, but if anything is broken the Warranty is voided.

The small ribbon connection is really cheap plastic crap that should not have come out so easily. It should have been easily put back into the holder but it's not which really sucks. I was very careful when doing the upgrade and I have never broken anything while building Macs or servicing them which makes me think this thing really is a throw-away disposable Mac.

And I just got my XP SP2 CD in the mail the day after I broke the Mini. Maybe buying M$ software for the first time in my life was the catalyst for breaking the Mac. The Mini knew I was going to put Windoze on it and commited suicide by cutting it's throat.

Offline
Last seen: 12 years 4 months ago
Joined: Jan 28 2005 - 17:56
Posts: 170
Re: well i thought adding ram was


And I just got my XP SP2 CD in the mail the day after I broke the Mini. Maybe buying M$ software for the first time in my life was the catalyst for breaking the Mac. The Mini knew I was going to put Windoze on it and commited suicide by cutting it's throat.

Well written.

madmax_2069's picture
Offline
Last seen: 14 years 2 weeks ago
Joined: Sep 24 2005 - 07:28
Posts: 664
yea i hear you on that one lo

yea i hear you on that one lol

Offline
Last seen: 14 years 11 months ago
Joined: Aug 23 2005 - 20:36
Posts: 126
What's wrong with installing

What's wrong with installing windows on your mac? You guys don't like games, I assume? Smile

Log in or register to post comments