I need to know where to get this hardware piece

8 posts / 0 new
Last post
Offline
Last seen: 19 years 2 months ago
Joined: Aug 7 2004 - 18:56
Posts: 3
I need to know where to get this hardware piece

Appletalk to Ethernet Network Box/Bridge Apple MAC

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=4601&item=5113837721&rd=1&ssPageName=WDVW

I need this to hook up my LC 575 to the internet...

PS: If anyone knows a better way to get my lc hooked up over to the internet, please tell me how Biggrin

Greetings

Offline
Last seen: 19 years 2 months ago
Joined: Aug 7 2004 - 18:56
Posts: 3
PS 2: I need to know where i

PS 2: I need to know where i can purchase memory for this mac since 4mb isn't enough...

Offline
Last seen: 12 hours 51 min ago
Joined: Dec 20 2003 - 10:38
Posts: 570
A much much better way would

A much much better way would be to pick up an ethernet card. Either an LC ethernet card or a Comm slot ethernet card will work. Some Comm slot II cards will fit either the Comm slot or Comm slot II but not all will.

Wayne

Offline
Last seen: 7 years 3 weeks ago
Joined: Dec 19 2003 - 17:40
Posts: 566
Re: I need to know where to get this hardware piece

Appletalk to Ethernet Network Box/Bridge Apple MAC

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=4601&item=5113837721&rd=1&ssPageName=WDVW

I need this to hook up my LC 575 to the internet...

PS: If anyone knows a better way to get my lc hooked up over to the internet, please tell me how Biggrin

Greetings

you would be better with a Comm Slot or LC PDS ethernet card ... these fit inside expansion slots on the motherboard ... like PCI cards today ...

Comm: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=4601&item=5113190356&rd=1&ssPageName=WDVW

LC-PDS: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=44926&item=5113511333&rd=1&ssPageName=WD2V

note that the Comm slot card has a BNC port, not a RJ-45 ... try and get one that has a RJ-45 as this will make hooking it up alot simpler ...

as for memory ... eBay is your best bet ... you need a 72-pin SIMM ...

TOM

Offline
Last seen: 19 years 2 months ago
Joined: Aug 7 2004 - 18:56
Posts: 3
hi, thanks for this... althou

hi, thanks for this... although i have a question.. do you think the second ebay link you posted will work on an lc 575? is it "plug and play"? or do i need to install extra stuff/software?

BTW: For the 72-pin SIMM, are pc and mac 72-pin simms the same thing?

Offline
Last seen: 7 years 3 weeks ago
Joined: Dec 19 2003 - 17:40
Posts: 566
Re: hi, thanks for this... althou

hi, thanks for this... although i have a question.. do you think the second ebay link you posted will work on an lc 575? is it "plug and play"? or do i need to install extra stuff/software?

BTW: For the 72-pin SIMM, are pc and mac 72-pin simms the same thing?


if you have 7.5 or later installed then it should just be plug and play! ... if not then you need the drivers ...

http://www.info.apple.com/support/oldersoftwarelist.html

its on there under "Network Software Installer" ...

as for the SIMMs ... there are two types of 72pin SIMMs, EDO and FPM ... AFAIK you need FPM (Fast Page Mode) SIMMs ... but other than that you should be OK with PC RAM ...

TOM

Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
Frys

Frys electronics carries them.

sourapple's picture
Offline
Last seen: 15 years 10 months ago
Joined: May 27 2004 - 02:42
Posts: 209
God forbid anyone go there.

God forbid anyone go there.

Log in or register to post comments