Apple IIGS PSUs

13 posts / 0 new
Last post
Offline
Last seen: 1 year 6 months ago
Joined: May 9 2014 - 12:45
Posts: 118
Apple IIGS PSUs

Is there a version of the Apple IIGS PSU that has a switch for input voltage to select between 110 and 220 volts? To be more specific, has this variation been sold in the US market?

speedyG's picture
Offline
Last seen: 4 years 10 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: Apple IIGS PSUs

Hello protek,
yes there is a version that has been sold in the USA, but it did not come from Apple -
but instead from Vulcan. They sold a version together with a IDE-Disk inside too and also inside
a switch to determine input voltage. It was sold as Vulcan Gold Vers.2.0
speedyG

Offline
Last seen: 1 year 6 months ago
Joined: May 9 2014 - 12:45
Posts: 118
Re: Apple IIGS PSUs

Thanks for the info, SpeedyG!

Offline
Last seen: 3 years 7 months ago
Joined: Jan 24 2005 - 16:20
Posts: 356
Re: Apple IIGS PSUs

it did not come from Apple - but instead from Vulcan

Applied Engineering resold a heavy duty 70W power supply (made in Asia, not on Vulcan) as well as their Vulcan PSU/Hard Drive.

speedyG's picture
Offline
Last seen: 4 years 10 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: Apple IIGS PSUs

hello sfahay,
thanks for correction. You are of course correct, the souce is indeed Applied Engineering.
speedyG

Offline
Last seen: 1 year 6 months ago
Joined: May 27 2013 - 13:01
Posts: 849
Re: Apple IIGS PSUs

A BUGG PSU might also do the job.

speedyG's picture
Offline
Last seen: 4 years 10 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: Apple IIGS PSUs

Hello insanitor,
protek is a new member and it´s not clear at the moment how far the experience is present
with soldering and reading shematics...
if you are talking about the BUGGY PSU ( mentioned in some threads ) he would have to change the connector...
the BUGGY PSU´s are delivered with connectors for the II+ and IIe series not for the IIGS.
So if he gets one. he will have to change the plug and the connections.
But if enough experience with soldering is availiable there are several soltions possible.
Up to the moment he only asks for those PSU´s being "sold in USA" - this might be indication
that he does not want to touch soldering iron.....
sincerely speedyG

Offline
Last seen: 1 year 6 months ago
Joined: May 9 2014 - 12:45
Posts: 118
Re: Apple IIGS PSUs

I'd like to think myself as competent regarding soldering. I've changed caps and installed chip sockets into old computers. I've also done my own cables based on schematics and I've installed a switch on the mains side of a PSU to mention a few.

I'm open for opening up the existing PSU and replacing the insides. From what I've understood from the Buggy, though, that it is basically a PicoPSU and those usually are meant to be used with external PSUs and a brick on the floor isn't exactly what I'm after. Smile

speedyG's picture
Offline
Last seen: 4 years 10 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: Apple IIGS PSUs

Hello Protek,
it was just a conclusion from postings up till now....
sometimes old vet´s like us start immediatly with proposals and afterwards discover that we
started at a point a newbie can´t follow....
so it was just mentioning about some care....
There is also another alternate solution....:
http://www.appleii-box.de/H037_AppleIIupgradingPowersupllies.htm
allthough it shows a mod of the "classic Apple II PSU" there are also info´s how similar mod can be performed
with IIGS Powersupply.... i´ve performed such mod with 2 IIGS PSU´s too....
Allthough it´s not a common solution, it´s very effective.... without having an "external brick"....
the only point will be to find a fitting very small PC-PSU.
Then it can be handled that way, that after performence of the mod the only difference
viewable fron the outside of the PSU, will be additional outlet of the cooling fan in the PSU-case....
sincerely speedyG

Offline
Last seen: 1 year 6 months ago
Joined: May 27 2013 - 13:01
Posts: 849
Re: Apple IIGS PSUs

Hello insanitor,
protek is a new member and it´s not clear at the moment how far the experience is present
with soldering and reading shematics...
if you are talking about the BUGGY PSU ( mentioned in some threads ) he would have to change the connector...
the BUGGY PSU´s are delivered with connectors for the II+ and IIe series not for the IIGS.
So if he gets one. he will have to change the plug and the connections.
But if enough experience with soldering is availiable there are several soltions possible.
Up to the moment he only asks for those PSU´s being "sold in USA" - this might be indication
that he does not want to touch soldering iron.....
sincerely speedyG

If he does not want to change the connector then this product is something he might be interested in:

https://ultimateapple2.com/catalogzenQI/index.php?main_page=product_info&cPath=1_6&products_id=8

speedyG's picture
Offline
Last seen: 4 years 10 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: Apple IIGS PSUs

Hello insanitor,
if ignoring end of posting #7 -
thanks for adding this info. This upgrades the proposal to real alternate solution.
sincerely speedyG

Offline
Last seen: 1 year 6 months ago
Joined: May 9 2014 - 12:45
Posts: 118
Re: Apple IIGS PSUs

I'm considering something in the line of EOS MVLT80-4000.

speedyG's picture
Offline
Last seen: 4 years 10 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: Apple IIGS PSUs

thats a very good alternative solution...
though rather expensive.... real high quality....
leaves enough space to add a cooling vent....
speedyG

Log in or register to post comments