Just wanted to drop in and say hi, and give you a short introduction.
This year for Christmas I gave myself a Newton board and a parts kit from Unicorn. I've been busy reading all the forum postings, still in progress, to educate my self before I start. I was also fortunate enough to meet Cory over on the Vintage Computer forum. After reading many messages here I see that I am in good hands.
Today I downloaded and started playing with POM to get a feel for the WOZ monitor. Even playing with the POM I get chills up my spine in anticipation of the "real" thing.
My experience goes back to the mid 1970's where I designed and built my first microcomputer based on the Intel 8008. (You may have guessed that from my user id...) Back then I spent 3 years designing, building, and wire wrapping my system. Some of you may have seen my sites where I refer to the experience.
I also have a link on there to my chronworks site. Last year I built a single board Z80 CPM machine. I've also been working on restoring a DEC PDP11/83.
I look forward to hanging out with all of you!