Merry Christmas!

3 posts / 0 new
Last post
Sherlock's picture
Offline
Last seen: 6 years 5 months ago
Joined: Dec 20 2014 - 09:58
Posts: 135
Merry Christmas!

Hello All:

Here is the Merry Christmas program for the Apple 1. My first Apple 1 BASIC program!

It shows a picture of a Christmas tree and plays "We Wish You A Merry Christmas" tune on the ACI output. If you don't have an amplifier setup on the ACI output, you can just use headphones, and you can hear it.

Notes:
You have to load BASIC, and then load 004A.00FF and 0400.0FFF

It wouldn't let me upload the AIFF so I changed the extension to WAV and added instructions to change the downloaded file to a .AIFF extension. I also converted it to real WAV as well. I tested the AIFF and it works, but I wasn't able to test the WAV yet, but I converted it directly from the AIFF, so it should work fine.

Let me know if you have problems with it.

Anyway, hope you all enjoy it! Happy Holidays!

CC_333's picture
Offline
Last seen: 7 years 4 months ago
Joined: Jul 26 2012 - 00:44
Posts: 56
Re: Merry Christmas!

Will this work on an Apple IIe as well?

c

Sherlock's picture
Offline
Last seen: 6 years 5 months ago
Joined: Dec 20 2014 - 09:58
Posts: 135
Re: Merry Christmas!

Will this work on an Apple IIe as well?

c

Sorry, I don't know. I think I remember reading about how to convert sound between the apple 1 and iie. I think it was pretty simple, but it did require a change. Maybe you could find it by searching the forums.

Log in or register to post comments