Video adapter for PAL Apple IIc

16 posts / 0 new
Last post
Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
Video adapter for PAL Apple IIc

Hello

I made an adapter for the Pal Apple IIc that provides RGBS  ( SCART) and Composite outputs.

For more info see the project page at hackaday:  https://hackaday.io/project/183445-video-adapter-for-pal-apple-iic

Leon

Offline
Last seen: 2 years 6 months ago
Joined: Jun 22 2019 - 09:48
Posts: 41
Cool and well done! :-) How

Cool and well done! :-)

 

How much (approximately) is the cost of the components?

Offline
Last seen: 1 month 23 hours ago
Joined: Aug 4 2015 - 14:30
Posts: 150
Really nice

When the details are finished and you publish the schematic and BOM list, I would like to make one.

Awesome job!

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
Thanks,I haven't calculate

Thanks,

I haven't calculate the cost but the cpld cost is about 2 to 3€, the Ad724 is about 1 to 2€ there are  no expensive components, I belive the connectors are cheap too.

One needs a xilinx programer to configure the cpld.

Soon the shematics and .jed files will be availiable.

 

 

 

amauget's picture
Offline
Last seen: 6 days 3 hours ago
Joined: Jan 3 2011 - 11:34
Posts: 341
Great job !

Hi,

 

Awesome job ! Do you plan to make a small batch of these ? If so, I'll buy a couple.

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
New Pcbs

I am waiting 10 new version pcbs with some improvements and errors fixed, after I test them and everything is ok I'll inform you. Three of them are for my friends with pal IIc here in Athens. It will take at least another month I believe to arrive from China.

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
New pcbs arrived

The new pcbs arrived, I tested them and they are ok so I'll publish the schematics and the cpld file.

 

 

 

Offline
Last seen: 1 month 23 hours ago
Joined: Aug 4 2015 - 14:30
Posts: 150
Can't wait!

Nuf said :-)

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
Published

Project files uploaded at hackaday project page

iatkos's picture
Offline
Last seen: 1 month 4 weeks ago
Joined: Oct 7 2017 - 09:43
Posts: 27
Thank you Leon for sharing this project

Many thanks Leon for sharing this beautiful Adapter !

Best regards from France.

PhilZ

Offline
Last seen: 1 month 23 hours ago
Joined: Aug 4 2015 - 14:30
Posts: 150
A few questions

Hi @lliont

I searched for Hackaday and found this: https://hackaday.io/project/183445-video-adapter-for-pal-apple-iic

Is that the right one?

 

There are 5 files.

What are they for, how do I use them?

(I'm a bit of a noob with this)

 

I uploaded the zip-file to https://aisler.net/ because I have used them once before and they are located in holland or germany.

So there are no long shipping time or import tax and all that.

It uploaded and their webpage said:

We have encountered an critical issue while processing your data. Please check the Processing Notes on the right side.Processing Notes Board outline is missingWe could not find or generate the board outline. Please check your design and add a board outline. Please refer to our Guide to a Beautiful Board Outline.

Is there something wrong with the zip-file or it is me that did it wrong?

 

Then there is something about "program the cpld on board".

How is this done?

 

It's a bit confusing to me, hope you can clear it up.

 

 

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
You need a way to program the cpld

There is a chip the XC9572XL (44pin version) that is a cpld and needs to be programmed to do what we need it to do.

So if you don't have a suitable programmer (for Xilinx cplds) you can't built this adapter, don't make the pcbs if you can't program the chip.

I made a new zip that will pass the aisler.net requirements, you can download it but don't make the boards if you can't program the cpld.

The .sch .brd files are schematic and board files from the eagle cad program I used to design the pcb.

 

 

Offline
Last seen: 1 month 23 hours ago
Joined: Aug 4 2015 - 14:30
Posts: 150
Is there a programmer

which you can recommend on ebay or amazon or similar place?

How does such a programmer work?

I mean how does that programmer know what to do?

Does it take an input file to control the programming like an eprom burner?

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
Xilinx iMPACT

You need a utility called iMPACT that you can find in the ISE Design Suite 14.7, free from Xilinx

and  a programmer clone that you can find at ebay by searching for "Xilinx Platform USB Download Cable Jtag Programmer"

You then open the .jed file from the iMPACT utility and program the cpld that must be on the assembled board and connected to the apple IIc to take power from.

 

 

 

 

Offline
Last seen: 2 years 2 months ago
Joined: Jan 7 2022 - 17:17
Posts: 8
3d print case

A friend (Akis) designed a 3d print case for the adapter, the stl file has been uploaded at the project page at  hackaday.

 

 

 

 

Offline
Last seen: 2 years 6 months ago
Joined: Jun 22 2019 - 09:48
Posts: 41
Cool! Maybe something I will

Cool!

 

Maybe something I will look into :-)

 

Log in or register to post comments