Part Number (cross) for Apple Paddle Momentary Switch

3 posts / 0 new
Last post
Offline
Last seen: 23 hours 44 min ago
Joined: Mar 31 2020 - 19:55
Posts: 445
Part Number (cross) for Apple Paddle Momentary Switch

Do any of you have a cross-ref part number for the momentary switches used on the original Apple Paddles?

 

The factory switches were either red, or black. I have seen both types used (mine are red), an I have seen sets with one of each colour (red paddle 0, black paddle 1).

 

I could use a p.n for either or both.

 

One of the closest matches that I have seen is this:

https://www.allelectronics.com/item/mpb-19/spst-momentary-n.o.-pushbutton-w/wire-leads/1.html

https://www.allelectronics.com/item/mpb-1/spst-momentary-n.o.-red-pushbutton/1.html

https://www.allelectronics.com/item/mpb-1b/spst-momentary-n.o.-black-pushbutton/1.html

https://www.allelectronics.com/item/mpb-1bl/spst-n.o.-momentary-pushbutton-blue/1.html

 

I only have their catalogue number, and not a general datasheet for it, so I'm unsure if its measurements are identical. 

 

 

 

 

Offline
Last seen: 12 hours 21 min ago
Joined: Sep 4 2020 - 01:32
Posts: 6
Once upon a time RadioShack

Once upon a time RadioShack part not sure the number. 

Offline
Last seen: 1 week 4 days ago
Joined: Jun 5 2008 - 07:26
Posts: 448
I'd say most likely that any

I'd say most likely that any of those switches would work.  They are extremely common.  Shipping is going to cost more than the part itself, so you may want to order several and pick the one you like best.  Better yet, you can find the data sheets on mouser or digikey for similar switches and  you can measure the examples you have and compare.

 

regards,

Mike Willegal

Log in or register to post comments