Question about Uthernet II

6 posts / 0 new
Last post
Internetronic's picture
Offline
Last seen: 1 year 5 months ago
Joined: Jan 28 2016 - 21:29
Posts: 14
Question about Uthernet II

Is the Uthernet II supposed to be able to slide into the Apple // easily? I have an Enhanced Apple //e, and I haven't been able to get it in.

Thanks!

tokabln's picture
Offline
Last seen: 4 months 3 weeks ago
Joined: Dec 30 2015 - 10:48
Posts: 253
Re: Question about Uthernet II

I just wonder why you aren't able to add the card into an Apple IIe... mine is working fine with this card... so what's your problem?

Mine is fitted in slot 7 and I also installed an adaptor to be able to attach an Ethernet Cable to the Apple outside.

It works fine with Contiki.

Please take a look at following thread as well where you will find information's about the mentioned adaptor and many more.

http://www.applefritter.com/content/my-uthernet-ii-arrived

Offline
Last seen: 7 years 2 months ago
Joined: Jun 11 2011 - 21:57
Posts: 109
Re: Question about Uthernet II

It's a bit of a tight fit and because it is so short you can't push down on it as easily. It will fit though.

Internetronic's picture
Offline
Last seen: 1 year 5 months ago
Joined: Jan 28 2016 - 21:29
Posts: 14
Re: Question about Uthernet II

Thanks for the replies! I got it to fit.

MarkO's picture
Offline
Last seen: 2 weeks 3 days ago
Joined: Dec 10 2011 - 16:26
Posts: 688
Re: Question about Uthernet II

Thanks for the replies! I got it to fit.

Personally, I think the Card might be a Little Long on the Slot Connector, but I haven't "busted out" my Calipers to compare to any other Apple ][ Cards...

MarkO

BillO's picture
Offline
Last seen: 3 years 10 months ago
Joined: Jun 20 2014 - 18:03
Posts: 258
Re: Question about Uthernet II

Mine popped right in without an issue.

Log in or register to post comments