vga mod on cc

4 posts / 0 new
Last post
Offline
Last seen: 11 years 10 months ago
Joined: Jun 14 2006 - 02:34
vga mod on cc

Hi peoples newbie here Biggrin

I've done the vga mod (connected pin 8 to pin 12 and done the sense wire)

When I tried to test it, it boot up no problem and brought me to the desktop menu, this happend twice I turned it on and booted up to the desktop menu.

But after three days I turned it on and tried to boot on again but it only gets me to the screen where a small disk icon appears and after that a small color classic icon.

Now it never boots up to the desktop menu.

What gives? any ideas on what to do?

coius's picture
Offline
Last seen: 4 years 2 months ago
Joined: Aug 25 2004 - 13:56
try booting from a Floppy wit

try booting from a Floppy with an OS, and see if the drive shows up. If it does, your Drive OS might be corrupt, which would instill a reinstall.

Usually, the "[?]* means that it can't find the system folder or any OS.

Offline
Last seen: 11 years 10 months ago
Joined: Jun 14 2006 - 02:34
bad for me

Thanks for your reply coius

Too bad for me I don't have a floppy with an OS can anyone show me somelink on where to buy or download it instead?

eeun's picture
Offline
Last seen: 5 months 3 weeks ago
Joined: Dec 19 2003 - 17:34
Google for "gamba Macintosh"

Google for "gamba Macintosh" and you'll find the home page of Gamba. The site has lots of links to system disks on floppy images.

You can find info on using a PC to write Mac disk images at the always useful Jag's House.

You'll also likely need a PC version of Stuffit Expander.

Also, here's a link to an OS 7.6 disk tools image. Link

Log in or register to post comments