FS: Newer Tech MAXpowr G3 400/200/1MB for PCI PowerMacs

2 posts / 0 new
Last post
Jon
Jon's picture
Offline
Last seen: 13 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
FS: Newer Tech MAXpowr G3 400/200/1MB for PCI PowerMacs

Card only, previously pulled from an 8600 by someone else. Sticker says 400/200 1.0 so I'm assuming it's a 400MHz G3 with 1MB cache at 200MHz. There is a 4 DIP switch block on the card and all are set Off. Silk screening marks the card with DT351 REV C.

$50 OBO. If you buy for $50 I'll pay to ship in the USA and Canada. If no one takes it for $50 it'll be best offer and the buyer pays shipping. I'm in 64053.

Jon
Jon's picture
Offline
Last seen: 13 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
Tested and working my both my

Tested and working my both my 7600/132 and PowerComputing PowerWave 120. It ran at 445MHz in each, and as I don't have the Newer CP to use, I have no idea if the cache worked or not, but they are certainly speedier than the old 604s that were in them.

I'm dropping to $40 shipped. Otherwise same deal, BO and actual shipping.

Log in or register to post comments