Apple 1 Clock Section

2 posts / 0 new
Last post
Offline
Last seen: 10 years 10 months ago
Joined: Mar 9 2005 - 03:00
Apple 1 Clock Section

From the schematic part B1 seems to have pin 1 in an undetermined state when configured for a 6502. The only way I can see the rom being selected is if inputs 1 and 2 on the 00 were high... So...? Do the 74xx series have built in pull-up resistors?

Offline
Last seen: 12 years 11 months ago
Joined: Apr 26 2005 - 23:52
Re: Apple 1 Clock Section

74xx are TTL, you can leave them unconnected... but chips misbehave sometimes, so I usually send to ground all unused pins...

logjam wrote:
From the schematic part B1 seems to have pin 1 in an undetermined state when configured for a 6502. The only way I can see the rom being selected is if inputs 1 and 2 on the 00 were high... So...? Do the 74xx series have built in pull-up resistors?

Log in or register to post comments