Apple II

linapple

Submitted by Hatta on August 22, 2010 - 9:43am

Has anyone here used Linapple on Linux? I cannot figure out how to send an open-apple to the emulator. Linapple is an SDL port of AppleWin, which uses left-alt. I've tried that to no effect.

Forums: 
Apple II

Well over 600 5 1/4 Disks up for sale!

Submitted by A2forever on August 9, 2010 - 6:26pm

ok.... I have just boxed up well over 600 5 1/4 floppy disks! these disks have everything from Copy programs , Utilities , Games & Modem programs on them! I know , or should I think , that Dog Chow presented an interest in them , please let me know if I am correct on this... If not I was going to put it up on Ebay for an auction , if not and someone needs them right away , let me know , I am going to have to take the whole box , which weighs alot , to the Post Office and figure out the shipping costs.

Forums: 
Apple II

new to Apple IIe enhanced - which CF card to get

Submitted by iainjh on August 4, 2010 - 4:53pm

Hi

over in the marketplace forum I've posted a request to find a used or cheap IDE interface /compact flash solution to load games and so on into my IIe.

Its been decades since i sold a few 2e's and 2c's and macs in a shop and I haven't much retained knowledge of the IIe at all. I have a 2e enhanced, 2 x floppy drives, and dos disks, would now like to get a CF card loaded and booted and play some games etc etc.

please can someone answer a few questions:

Forums: 
Apple II

A Peculiar II GS Problem....

Submitted by gsmcten on July 31, 2010 - 8:17pm

Good Evening All,

I have just recently completed my apple IIc upgrade (as posted) and decided to start upgrading my ROM03 II GS. This is what is installed:

Forums: 
Apple II

WTB - cffa or microdrive or other Compact Flash interface for IIe

Submitted by iainjh on July 24, 2010 - 3:05pm

Hi

I cant afford buying a new a focus/cffa/or a microdrive right now, so does anyone have a used card to sell on, or could recommend a cheaper alternative?

I have drives but few disks and so want to load programs and games from CF.

I have a 2e enhanced.

cheers in advance!

Iain, UK

Forums: 
Apple II

Apple //e fails self-diagnostic (RAM)

Submitted by macvooh on July 22, 2010 - 6:36pm

Hello Apple geniuses
I had some plans with my dusty Apple //e (which still worked last year, albeit some r/w errors with floppies) but decided to do some reading first.
Reading the IIe owners manual I discovered the self diagnose function: solid Apple key - CONTROL - RESET
I did that and got:
RAM: F13 F12 F11 F10 F9 F8 F7 F6
The other self diagnose method (power on holding solid Apple key) only gave me
RAM:
and nothing else

Forums: 
Apple II

Mountain Hardware ROMPlus interface's manual

Submitted by khw on July 21, 2010 - 2:05pm

Hello,
I was lucky with the Superclock II manual ( thank you Jeff ), so I try again re. the Mountain Hardware ROMplus interface. Has anyone a manual e.g. as PDF file? I only need to know how to start the programs in the 2316/2716 ROMs/EPROMs that I plugged into the free sockets.
Karl

P.S. The manual for the Accelerator II+ ( plus! ) would be still very highly appreciated...

Forums: 
Apple II

"Yes Doctor; The patient survived the transplant."

Submitted by gsmcten on July 20, 2010 - 5:24pm

"Thank you nurse."

Whew!

I had decided a while back that when I had the time, money, and patience that I would
upgrade my IIc to ROM04. Now this is a 1985 IIc with an Applied Engineering ZRAM Ultra II
carrying 1Meg of ram and the original ROM01 chip installed. I forget what year the ZRAM Ultra II came out (I can check the AE website now), but as soon as they hit the market myself and my best friend Rick went down and bought 1 each for our IIc's. We sat up into the night installing them and had lots of fun doing it.

Forums: 
Apple II

Apple II Europlus Power Supply Fix

Submitted by Simon27 on July 4, 2010 - 1:48pm

The power supply in my Apple II Europlus has just gone. With a pop, whisp of smoke and that unmistakable smell I suspect one of the capacitors have blown.

I've taken it out of the Apple but have not gone any further with disassembling it.

I know there can be hight voltages stored in some the caps but it should be fairly easy to fix - I just wanted to make a post here to check that I was doing the right thing.

What I've read online so far suggests that C7 is usually the one to go.

Forums: 
Apple II

Running A Panasonic KX-P1124 Printer On a IIC

Submitted by gsmcten on July 1, 2010 - 8:35pm

The start of something new.....

I have a Panasonic KX-P1124 Parallel Printer and a Grappler IIc device that I want to use with both my IIc and my IIc Plus instead of my Imagewriter, or Imagewriter II.

With so many knowledgable folks here I figured that I could ask without getting laughed at too much.

Is there any special software that I need to make this concoction work, or is it a fairly straight forward set-up?

As Usual; any assistance would be greatly appreciated.

Forums: 
Apple II

Pages

Subscribe to Apple II