Apple II

Apple /// products...

Submitted by softwarejanitor on July 16, 2023 - 6:09pm

I just recently received by Titan /// + //e and Z80 SoftCard clones from Joe's Computer Museum for my Apple ///.  I have been following the threads about using a Dan ][ card for SD storage as well as FloppyEmu on the Apple /// and I've built the cable converters to facilitate that.

 

Seems like a new renissance for the Apple ///.  With these boards it can run most Apple II software even things that need a //e and a lot of CP/M software.  It really changes the whole world for using an Apple ///...

 

Forums: 
Apple II

Micro-SCI / Franklin Floppy Disk Controller clone

Submitted by cryu on July 16, 2023 - 1:12am

I finally got around to completely reverse-engineering a spare Micro-SCI floppy disk controller, and have managed to duplicate it.  It has been running in my ACE1000 all morning, and appears to be working correctly.

Forums: 
Apple II

Need some assistance on repairing some Disk II drives

Submitted by strelock on July 12, 2023 - 2:32am

I have 4 Disk II drives, but only one of them is working. I am convinced that one of the 4 is a clone, as it has a different analog board with no Apple part number on it and has asian characters on a label on the bottom. I am attempting to get at least one other working drive as I intend to sell one of my Apple II systems and want it to come with at least one good drive.

 

Forums: 
Apple II

Mythical drive sizes?

Submitted by Wayne on July 7, 2023 - 12:53pm

I’ve seen Applied Engineering Vulcan drives in 20, 40, 60,80, & 100mb sizes

They also advertised 200mb drives but I’ve never seen any evidence that they existed though I’d love to see one

Applied Ingenuity Innerdrives were advertised at 20, 30, 40, 50, and 100mb. I’ve only seen 20 & 40mb drives. Likely 30 & 50mb exist but I wonder if 100mb actually did or if that was just advertising.

Forums: 
Apple II

Apple II Rev.3: HGR not working

Submitted by Rajaz on July 5, 2023 - 6:17pm

Hi all,

Long time reader but first time poster. I'm troubleshooting my Rev.3 (7850). After isolating Ram problems and swapping 1 or 2 LS, it now does boot and start disk II.

The main default comes from HGR command, which doesn't clear the screen (Hires1), so I suspected the $2000-$3FFF RAM area, but corresponding chips are tested good. After issuing HGR command,  the screen doesn't blank and shows partial white blocks. Otherwise, HGR2 works: Hires2 is cleared. Text (1&2) and GR work well.

Any hint appreciated ! Thanks.

Forums: 
Apple II

Apple IIc 5.25" Floppy (ALPS) repair

Submitted by IT_Luke on July 4, 2023 - 5:22am

Hi all, I posted this on the discord channel but Tom suggested to post it also here for reference so here it is (I added some pics for reference). I was having trouble with my IIc floppy, more specifically when writings as reading was working fine (I hadn't used it in a while). When attempting to save anything I would get random write protect or IO Error. Sometimes it would hint on starting to save (creating the file name for ex.) but shortly after give IO Error or simply a Write protect. So it was time to investigate.

Forums: 
Apple II

Orange Micro Grappler+ Connection to Modern Printers

Submitted by hdbluzman on July 2, 2023 - 9:32am

I'm in the process of resurrecting an Apple II+, and I have everything working including memory expansion and 80-column cards and two disk drives. All that's left is an Orange Micro Grappler+ card. I want to use it to connect to a modern printer that has a USB 2.0 connection. Does anyone know if this is possible and, if so, how to do it?

Forums: 
Apple II

cc65/ProDOSi: Error #64 loading stub in Apple2Enh program

Submitted by Harry Potter on July 2, 2023 - 8:18am

Hi!  I'm currently working on debugging my AdvSkel65 program.  Right now, there are two bad bugs with it: 1. most 128k ports seem to execute the wrong verb, and 2. the Apple2enh ports are having problems loading a low memory stub: I'm getting the monitor just after the stub was supposed to load.  Debugging code reveals gthat I'm getting error #64: Invalid Path.  When I look at the disk image with CiderPress, the path seems correct.  The path is "/PRODOS203/LOWMEM," and I attached the image.  I don't understand why I'm getting that.  :(  Any advice would be helpful.

Forums: 
Apple II

Apple IIc A2M4050 5.25” drive issue LED

Submitted by Murphyciscokid on June 26, 2023 - 11:39pm

Hi all,

I did a basic google search and came up empty on this topic. My A2M4050 Drive LED light for reading and writing disks does not work. The drive itself DOES work in terms of reading and writing disks without issue. I'm not sure if it is just a bad LED or if there is an issue with the circuit itself.

 

Forums: 
Apple II

Pages

Subscribe to Apple II