Apple II

Hello all,

 I have setup my SSC on an appleII+ (clone), played a bit with terminal login and so on. The physical switches are set to 9600 bps, 8N1. It works well, however I decided to take it a bit further and catch some json coming from the other end of the SCC. I  have troubles integrating the serial data in a BASIC program. Let's assume the following string which is passed over serial:

{"test":"1234,56,78"}

and the following BASIC code to read this string over serial on the AppleII side:

10 print chr$(4);"IN#2"

15 j$=""

20 GET A$

Just curious if anyone here with a 605-4115-0 Apple II/II+ keyboard has tried the keycaps with Cherry MX keys. 

I know the  keycaps from later keyboards using ALPS keys are a little loose on Cherry MX stems.

Thanks,

Dave

I have an Apple IIe Enhanced, with a ReActiveMicro Universal PSU installed, an 80col/64k ram expansion card, and I am using a floppyEmu on a 5.25" 655-0101-D controller card (slot 7). There is also a SuperSerial Card installed (slot 2) and it works successfully.

Hi,

I have a picture problem on my Apple Monitor II (A2M2010) at near the top of screen. (Please see the attachment) I try to repair it by changed all Electrolyte capacitors, but they were not help. I need the suggestion what the components should have defective.