Anonymous
User login
Active forum topics
Recent content
Navigation
Announcements
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
40 Gigabytes and Growing.
Always Free.
Please consider contributing.
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
40 Gigabytes and Growing.
Always Free.
Please consider contributing.
This page, the entire Applefritter site, and all subsites of are copyright 1999-2999 by Tom Owad unless otherwise noted. All rights reserved. Apple, the Apple logo, Macintosh, Mac, MacOS, MacBook, iMac, and Mac Pro are trademarks of Apple Computer, Inc. LEGO®is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this site (the feeling's mutual).
PM Sent RE: rom burner
Woogie and all,
I am also interested in the "Towerized" IIe conversion. I have been cosidering transfering the motherboard, and all of the goodies to a small Compaq Tower case, but was not sure what to do about the keyboard. The one thing you could do would be to cut the IIe case just behind the keyboard, do some surgical work on it (to enclose the keyboard)and run a longer ribbon cable to the mb connection.
Also, I too am on a quest to build the "Ultimate IIe". So far I'm running an enhanced IIe mother board, a combination RGB/80 Col card in the big slot, an ASL SpintDisk with 1Meg in Slot 1, Slots 2 and 3 are empty right now, Slot 4 is a Super Serial Card II set up for an ImageWriter II, Slot 5 is empty, Slot 6 has one of Ritchie's CFFA Cards with a 64Meg Disk installed, and Slot 7 has a 5.25 Disk Controller card for the Dual 5.25 Disk Drive. I have bought several Liron 3.5" Controller cards for my disk drives, but for some reason they currently do not function.
I also have a System Saver hooked up to handle heat.
It is an ongoing love affair. lol
Pages