Apple II

ADTpro silliness

Submitted by Keatah on July 16, 2013 - 6:21pm

I just discovered (thanks to a vodka-enhanced evening) that you can use ADTpro to bootstrap AppleWin!

This lends to the idea of using 2 Applewin emulators, on the same machine.. One running AE and the other running TeleCat BBS. Now I can organize (easily) my BBS rips and images. Which is my short-term project.

Forums: 
Apple II

Enhanced File Catalogs for Mac GUI Vault

Submitted by Dog Cow on July 16, 2013 - 5:03pm

Today's Mac GUI Vault update brings enhanced file catalogs to over 70% of the 27,000 files currently in the Vault archive; that's almost 19,000 files.

Forums: 
Apple II

My vintage wire-wrapped card of excellence. I have no idea what I just bought.

Submitted by transwarp II guy on July 16, 2013 - 7:49am

I buy apple cards not necessarily knowing what it is or does. I only do this when it’s cheap.

Forums: 
Apple II

Transwarp + Zip Chip

Submitted by tkh on July 14, 2013 - 5:29am

Quick question:
Is it possible to install Transwarp and Zip Chip on the same computer?

Please share your opinion.
Thank you.

Forums: 
Apple II

Help_The Best Way to Copy Files to the CFFA Card?

Submitted by gsmcten on July 13, 2013 - 7:51pm

All,

I need help.

I have been away from doing regular Apple II stuff for a while.
I want to get back to it, but it seems somewhere along the path
(no pun intended)I have lost my way.

I am back at my trusty Platinum IIe trying to copy all of
my disks (Games and Utilites) to my CFFA Cards.
I have read the CFFA Manuals, but there does not seem to be a definite step-by-step
procedure for copying programs.

For instance:

Forums: 
Apple II

Apple IIe memory removal and replacement

Submitted by Geoff1985 on July 13, 2013 - 11:25am

My Apple IIe gives me the following after the RAM test RAM: 0 1 0 0 0 0 0 0

I am assuming that it is stating that the chip at F6 is bad. Can I unsolder and replace? Is there any special trick to doing this to avoid damaging the other components or the replacement? As far as a replacement chip goes, am I limited to what I can scavenge from another motherboard or is there a source for getting new chips? Any and all advice is most appreciated. Thanks!

Forums: 
Apple II

A couple of SuperSerialCard questions (simple stuff for sure)

Submitted by Keatah on July 11, 2013 - 8:54pm

I'm doing some basic experiments and learning the ins and outs of the SSC. Finally!! Currently I have a basic setup II+ to PC (SSC-cable-DB9serialport).

Is it normal for the terminal (PC hypertem) to have to be set to VT100 and FORCE INCOMING TO 7-bit ASCII? FOr unless I do that I get some extra garbage on the PC side.

The 8-bit / 7-bit dip switch on the card doesn't seem to correct this.

Now, if I use VT102 emulation on AlphaCom, I don't have this problem.

What's going on here.

Forums: 
Apple II

Trouble with ADTPro sending garbled text to Apple IIe

Submitted by Revontuli on July 9, 2013 - 10:52pm

ADTPro is sending garbled text when I try to send data to boot my Apple IIe, but it's consistent garbled text. Any suggestions?

Forums: 
Apple II

Spartan Apple II Emulator for C64 on ebay now.

Submitted by gsmcten on July 8, 2013 - 8:35pm

Good evening All,

Imagine my surprize this evening when I went up to eBay and seen this:

http://www.ebay.com/itm/141012520377?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_178wt_909

This is another of the "Holy Grail" finds.
Spartan did not make that meny of these things.
It's kinda like the C64 version of the MEC AND it uses Apple II cards, disk drives, and software.

Forums: 
Apple II

Can Apple II joysticks work on a GS ?

Submitted by mjnurney on July 7, 2013 - 12:38pm

So after all that , does the Apple ii joystick work on the Apple GS ?

Forums: 
Apple II

Pages

Subscribe to Apple II