Apple II

Apple 2e not booting

Submitted by yokomo on April 4, 2016 - 7:53pm

Hi All,
I recently purchased an apple 2e computer, on first boot the logo did come up but then the power supply gave way.
Power supply has since had all the capacitors replaced and has come back to life, all voltages are spot on. But now I get a screen with horizontal lines on boot.
Does anyone have any ideas on what it could be?
I added a pic for reference.

Forums: 
Apple II

Vote For Apple II

Submitted by 6502enhanced on April 4, 2016 - 3:59pm

Vote For The Apple II

Forums: 
Apple II

Question about Uthernet II

Submitted by Internetronic on April 3, 2016 - 12:12pm

Is the Uthernet II supposed to be able to slide into the Apple // easily? I have an Enhanced Apple //e, and I haven't been able to get it in.

Thanks!

Forums: 
Apple II

Europlus white box before Reset

Submitted by pfaraday on April 3, 2016 - 7:18am

After switch on I get a white box over the whole screen and need to press reset

Forums: 
Apple II

Disk II Positioning Disk fault?

Submitted by pfaraday on April 3, 2016 - 7:10am

Disk II behaving odd, Positioning Disk spinning with out stopping!

Forums: 
Apple II

solved

Submitted by insanitor on April 2, 2016 - 2:30pm
Forums: 
Apple II

Bandinelli Software

Submitted by wishtoknow on April 1, 2016 - 10:46pm

According to the AE Phasor manual 1.1, there is
alisting for a game called Auto Gyro that uses
AE Phasor or I guess is Mockingboard compatible?

I have gone through asimov in the game section
to look for this particular game? Anybody herd of
it? Can supply screen shots etc.

Regards

Forums: 
Apple II

VisiCalc DOS3.3.Launcher

Submitted by 6502enhanced on April 1, 2016 - 3:21pm

I try to start VisiCalc from my CFFA with DOS3.3.Launcher (V 2.2) - the Launcher starts, but after a short moment the Apple IIe says:

]
90FB- A=00 x=07 Y=00 P=32 S=E9
*

With the "example" program that comes with the Launcher (Key Bored) it is no problem to start it from the CFFA.

I set the launch options using the DOS3.3.COPIER - tried both.

What could be the problem with VisiCalc?

Is VisiCalc using the auxiliary memory that the DOS3.3.Launcher needs by itself?
Or could the CFFA the problem?

Forums: 
Apple II

Can anyone identify this error or have a solution?

Submitted by VanguardFed on March 31, 2016 - 9:08pm

An Apple II Plus that I am looking at seems to not be booting properly. When booted up without software it does not produce the typical 'Apple ][' but a mass of j's, 5's and u's.

He said that it could be that he needs to reset the ROM.
Inside there is a GraphiCard printer card, a SuperSerial card, an Apple Disk control card, and an Applied Engineering Viewmaster-80.

Forums: 
Apple II

Can ADTPro use an "Apple II Serial Interface Card"

Submitted by pfaraday on March 30, 2016 - 12:27pm

Can ADTPro use an "Apple II Serial Interface Card"

Forums: 
Apple II

Pages

Subscribe to Apple II