Apple II

Hey, I received a machine several months back that I have just now had time to get around to messing with (Enhanced IIe)
that has a 'Street Electronics Business Card' installed. I am not at home where the machine is (saw it this morning before I left for work) so photos will have to wait till this evening.

Newbie here, at least in this decade, to the IIGS. I have several GS's and 5.25 and 3.5" drives. I also have tons of software including several versions of CopyII+. Is there an easy way to transfer the 5.25 floppies to 3.5 disks that will then be self-booting? How about also transferring then to a hard drive?

Thanks for any help you can give!

Hi all. Been using the asimov site from time to time to look for documentation. I have a number of manuals (the originals) that I am scanning in and would like to upload to asimov, but I have only ever downloaded material from the site, never uploaded anything. Figured before I started mucking around inside asimov I would go to the guys who put me onto the site in the first place! For example, never found the Wizard 80 manual for the Wizard 80 column card online and I have several of them in stock. Figured before I ship the last of them I should scan one in and post it to asimov.

I recently bought a USB cable to make an interface for my //c plus. It has a Built-in TTL COM PC-PL2303HX Chip, like this:
http://www.sears.com/shc/s/p_10153_12605_SPM7219242928P?ci_src=184425893&ci_sku=SPM7219242928&sid=IDx20131030xMPAPxCPA28

It has a standard USB type A male and TTL 4 pin connector
Black cable-----GND
Green cable-----TXD
White cable-----RXD
Red cable ------VCC