I want to make a 2nd formatted CF card using the RM Mirco
Looks like this should be super easy - boot the machine, run the RM utils - microdrv.setup - have the card to use inserted as drive 1.
But it just shows me I have an error drive 1 or such.
I'm using a brand new CF card, 32GB (the goal was to make a bunch of 2GB HFS partitions).
Do I need to do something different? Format the card first?
Here's a link to a document from ReActiveMicro that may be helpful.
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwiVhaDY28ntAhWHsJ4KHVk1BzwQFjAAegQIAhAC&url=https%3A%2F%2Fwiki.reactivemicro.com%2Fimages%2Fe%2Fe7%2FMicroDrive_Manual_2019.pdf&usg=AOvVaw06mfv8QEMx7CUx5R__sYM7
Worst case, you can email them and get a reply in a few days or less.
Good luck!
I struggled a little figuring this out last week as I got hold of the Total Replay HDV and was told it works on ReactiveMicro Drives and since i didn't want to damage the one that came with the unit i used a spare drflash card that was 512MB. What you need to do is use the reactive tools to make a floppy disk wit the utilites on it. When you boot the utils you can partition the system with 3 32MB partitions and then write the changes. Once done you can then use Cider Press to copy the HDV file to the partition of your choice. What i did was use the reactive micro boot A files with the protools, all the games, etc on the first boot disk, and then copied the Total Replay hdv to partition 2. Then i boot up the RMD system use tab to enter second bootable partition and press enter and i have total replay. The process is the same. create the partitions using the RMD tools on the flash drive.. i think the partitions can be done with the flash drive and floppy creation tools but I can't quite remember now as it took me about 2 hours to figure it all out and you move through the process. But thats basically it.
Gl and if you have more questions shoot them back...