Apple II

Assembler

Submitted by Jiroplas on March 8, 2025 - 11:49am

I need to run one assembler code on an apple 2. but I do not know how to do it! Can someone teach me?

Forums: 
Apple II

Trying to locate Apple II serial number registry website

Submitted by old_hitech on March 7, 2025 - 8:55pm

I wanted to reference the webpage that had information about Apple II serial numbers and their motherboard revision number and other information, but I cannot seem to locate the webpage/weblink. 

Does this webpage still exists? If so, can someone provide a link.  Thanks.

Forums: 
Apple II

Replacing IIc RAM Chips - Recommended USA Purchase

Submitted by Wavedude101 on March 6, 2025 - 2:57pm

After getting some blank discs and using ADT to burn some software, I'm finding out that my IIc has a few quirks at times. The biggest culprit being that there is an exclamation mark in the middle of the screen any time I am in 80 column mode. I cant find any information about this issue from anyone else online, but I do see that a lot of times users will have 2-3 exclamation marks on various parts of their screen usually due to a RAM issue. Though not as bad as some people's cases, it was worth doing some diagnosing to check if any internals were going bad.

Forums: 
Apple II

Apple II Plus Keyboard Not Working Help

Submitted by glennmange on March 5, 2025 - 1:32pm

Hello, newbie to the forums. Former Apple II user from back in the 1980s. I recently acquired a couple of Apple II pluses. One works fine... on the other, the keyboard (non-encoder card type) does not work at all. The Power Light comes on but no keys work when pressed. I removed the Cable and MM5740 Chip and Cleaned the contacts and sockets but that didn't do squat...Another thing worth noting is that the previous owner installed a Keytronics KB-200 keyboard along with an interface board. On the keytronics keyboard, less than 1/2 the keys would work when pressed.

Forums: 
Apple II

IIC+ and Floppy Emu Smartport not booting ???

Submitted by zonga on March 5, 2025 - 12:02am

Hi all,

 

 

So I have this new (to me) IIc+ that seems to be working fine. I can boot on an external 5.25 disk without problems.

 

Now comes the Floppy emu.  No matter what I do, I can't get the computer to boot n the floppy emu while emulating a 3.5 drive of a smartHD.  I know the images I am using are working fine, because I tried them on another computer.

Forums: 
Apple II

Making my own Apple IIc Mouse - HELP

Submitted by Wavedude101 on March 4, 2025 - 1:42am

Hello! I'm fairly new to the Apple II community. I just purchased an Apple IIc locally, but it did not come with anything but the unit itself, so I'm in the process of starting from scratch gathering peripherals or making my own. My hardest struggle is figuring out a solution for a mouse to use. So I've set out to find/make an adapter to use a mostly modern PS/2 mouse to interface with the 9 pin AppleMouse jack.

Does anyone have any thoughts on what might be holding me up? Is the Arduino code for the quadrature conversion the correct method? Is there a better way to test a mouse input on the Apple II or a better way to acknowledge it's being read by the machine? Some help is greatly appreciated!

Forums: 
Apple II

ULTIMA IV

Submitted by Khaibitgfx on March 3, 2025 - 5:23pm

Needs new labels? ... this might help...

 

Forums: 
Apple II

Pages

Subscribe to Apple II