Apple II

ADT-PRO Problems on Apple IIGS

Submitted by robbo007 on May 17, 2013 - 11:02am

Hi,
Seem to be having some problems using ADT-PTO on my apple IIGs. When trying to send PRODOS to the Apple IIGS to start the setup I get the following garble?? It worked before. Only thing I did was update my OSX to 10.8.3. I've updated the latex USBtoserial drivers for my device which is supported under 10.8.3 but no luck. Any ideas why Its not working now? Check image for details.

NOT FOUND: attached_image_#

Forums: 
Apple II

Want specs on Street Electronics' 'Cricket!' sound box

Submitted by blakespot on May 11, 2013 - 4:44pm

What hardware gave the Cricket! its music and sound effects?

Forums: 
Apple II

New apple//e

Submitted by digi42 on May 11, 2013 - 7:14am

Dear people,

We are trying to etch an apple//e as a hobby.
Does anybody know where to find an apple//e etch without peripherals. So we can create an apple//e clone from scratch.

with PIC and EEPROM. ( a 6507 for instance, an own operating system? )

i would buy a few, and iron an apple////////////////e+ together.

Peace,

Dagmar Hofman Brederode

Forums: 
Apple II

Apple IIgs with a Vulcan 100mb internal hard drive(help needed)

Submitted by MickyAAZ on May 9, 2013 - 10:20pm

Apple IIgs with 100mb internal Vulcan hard drive died & need help on deciding what options.

Forums: 
Apple II

Apple //e platinum displays junk on power up.

Submitted by ervin1701 on May 9, 2013 - 9:40pm

I recently aquired A Apple //e platinum . It will not fully power up and only displays junk on screan . No beep and keyboard is dead. power light will come on.

Forums: 
Apple II

Apple II For Sale: $5,500.00 Here We Go Again...

Submitted by gsmcten on May 9, 2013 - 9:19pm

I think this guy tried to sell this one before:

http://www.ebay.com/itm/321123147299?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1872wt_907

Forums: 
Apple II

Put non standard file on a DSK. How to do it?

Submitted by apprenticemart2 on May 9, 2013 - 9:15am

Hi All,

I need to find a way to get a file into a .dsk image so that I can use it. The file was extracted from a real 5.25"(Dos 3.3?)many years ago using a IIGS (then copied to Prodos 3.5" disk?) and a couple of other tricks on the way to get it to a modern computer.(this wasn't done by me)

I have tried lots of different ways to get it to work.

I have looked at the data in the file and can see it, but can't work out how to extract or change that data to a recognised format.

I am essentially a n00b.

What are my options?

Thanks
Martin

Forums: 
Apple II

Apple IIe serial number variations

Submitted by epoxy2600 on May 6, 2013 - 5:39pm

When the first Apple IIe systems shipped in January 1983, the sticker on the bottom displayed an A2S2-XXXX serial number just like the Apple II Plus. The typeset of the serial number looked just like the early Apple II & II Plus numbers (see S/N 1601 below...this is Mike Maginnis' system). It seems that soon after its introduction, a "1" was printed in front so it now read 1A2S2, presumably to avoid confusion with II Plus, and the number itself was printed in much larger, blockier text (see S/N 9761).

Forums: 
Apple II

IIc keyboard on IIGS logic - compatible?

Submitted by DrBunsen on May 6, 2013 - 11:50am

Just what it says in the subject, really.

Forums: 
Apple II

ADT PRO problem

Submitted by adoreapple on May 4, 2013 - 11:58pm

recently, I found ADT program. I use my mac to be server. I bought a rs232 to usb converter too. but I feel so strange. I use geoport and connect rs232. I must choice apple II c / image writer,I can transfer to my apple II gs. but when data input my gs. till mli screen. no reaction. I don't why?? do I miss something??? thx

Forums: 
Apple II

Pages

Subscribe to Apple II