Apple II

Apple //e picture issue

Submitted by tony359 on June 17, 2020 - 5:17pm

Hello again - I hope it's ok to keep the subjects separated in different threads.

 

I have tonight put together my Apple monocrome monitor - filter caps had gone - and unfortunately I still experience the same weird graphic issues I was observing on my LCD monitor. It looks like one vertical line is missing.

 

Please see below, can you help me? I believe the switch on the motherboard is set to monocrome (it doesn't say which is which but in this mode it seems more suitable for the screen).

Text mode seems ok.

Forums: 
Apple II

Apple disk ][ service

Submitted by tony359 on June 17, 2020 - 8:46am

Hello there,

As my two Disk ][ drives were making unhappy noises, I searched the web for some instructions but the german website I often see linked on these forums is not available anymore.

 

Forums: 
Apple II

Part Number (cross) for Apple Paddle Momentary Switch

Submitted by Timelord on June 17, 2020 - 8:38am

Do any of you have a cross-ref part number for the momentary switches used on the original Apple Paddles?

 

The factory switches were either red, or black. I have seen both types used (mine are red), an I have seen sets with one of each colour (red paddle 0, black paddle 1).

 

I could use a p.n for either or both.

 

One of the closest matches that I have seen is this:

Forums: 
Apple II

ADTPro help - unable to send data

Submitted by tony359 on June 16, 2020 - 5:31pm

Greetings all,

 

This is my first post here! A few days ago I managed to get an Apple //e and I am very excited as I used to have one when I was a kid.

 

Luckily it comes with the Super Serial card but without 10-pin adaptor. So I made one myself. After recapping the power supply I have powered it up today and it works-ish (drives need TLC and my LCD monitor doesn't seem to like the composite output - or there is an issue on that. The green phosphor Apple monitor is still waiting for some caps which I found exploded!).

 

Forums: 
Apple II

AppleWriter II for Apple II plus and AE 80 column card not working.

Submitted by NovellNetware on June 14, 2020 - 6:53pm

So I have a Applied Engineering Viewmaster 80 column card in my apple II plus. When I use Applewriter II for the apple II plus. It engauges the 80 column card but dos not work corretly. The command CTRL I 1 does not disble the 80 column card. So I have to bypass it.  The viewmaster just says to reboot the computer. I also found out the Apple Writer II is only compatible out of the box with a super R terminal 80 column card.  The Veiwmaster is compatible with the Video Term card. Yes I have tried video term patchs and such. Some stuff works great The other stuff does not.

Forums: 
Apple II

IIgs system Saver - Possible Undersized Resistors

Submitted by nick3092 on June 13, 2020 - 5:01pm

I recently picked up a IIgs System saver. I opened it up to see what it looked like on the inside and found that there are two resistors that seem to be running at too high of a wattage. They not only left burn marks on both sides of the PCB, but there is also a slight discoloring above them on the lid as well.

Forums: 
Apple II

Apple ][+ top adhesive/glue/tape ???

Submitted by KLund1 on June 11, 2020 - 5:29pm

I often have A]['s where that black connection tab at the left/right rear of the top come off.
The Velcro like connection between the two black halves is usually quite strong.
So I need something stronger to hold one of the black halves to the beige case.
I have tried automotive 3M 2-sided tape. It lasts about 3 pulls before it will not stick. typical superglue will not stick to the black side.
What do some of you use?
I'm sure this have been asked and answered before in here. But I do not know the right names for this part to do a good search.
Thanks

Forums: 
Apple II

New Apple 2 Keyboard replacement

Submitted by dfnr2 on June 11, 2020 - 12:22pm

I've been working on an ASCII keyboard that can be used in general for the Apple II, as well as other retrocomputers.  Here's a photo of the keyboard configured for Apple II.   The keyboard has connectors for Apple II/II+ and for the Apple 1.  It supports two different types of keymaps for the Apple II: All CAPS, and Upper/Lower with the repeat key used as a capslock.  However, the keymaps can be modified to pretty much anything.  This keyboard supports CTRL+BREAK for the /RESET signal, and also supports CLEAR on the Apple 1.

 

Forums: 
Apple II

Need help with unknown file format

Submitted by Verault on June 9, 2020 - 1:14pm

So I have a new CMS scsi II card however I cannot create or modify the card or partitions without the utility. I found a couple sources for the CMS utilities here: https://mirrors.apple2.org.za/ground.icaen.uiowa.edu/apple8/Utils/

 

and here: http://www.apple2online.com/web_documents/cms_hard_drive_utilities.zip

 

Forums: 
Apple II

Quickpro+II Software Writer

Submitted by mutant_pie on June 9, 2020 - 11:58am

Has anyone here used this program that's a "software writer" named Quickpro+II?https://www.ebay.com/itm/1987-Quickpro-II-Automatic-Program-Writer-APPLE-IIe-IIc-Computer-5-25-Computer-/283835771231?hash=item4215ee295f

Forums: 
Apple II

Pages

Subscribe to Apple II