Apple II

This is a long shot, but...

I am going to replace some components on my Ace 1200 to tr to get the normal hardwired Slot 6 drives to work again. I sspect the r/w/ motor control at H12, but if it should end up being H10, the 'Franklin FDC' gate array ASIC (this combines several aspects of the Disk ][ card onto an ASIC, then I have two options.

1. Find another Fanklin FDC chip. I am open to this, if anyone has spares. This was used on the Ace 1200 and on some Franklin Slot 6 Disk ][ clone cards.

Hi everyone,

I'm brand new to the Apple II and vintage computer community (unless you count mechanical calculators). I have a question about some add-ons for the Apple IIGS (although the add-ons work for other II models). I have a Floppy EMU model C for running Apple IIGS and emulating floppy drives. I quite like the device but I would like to have a mass storage device like the ReActiveMicro Drive/Turbo in my Apple IIGS to boot into GS/OS and store images.

Hello everybody,I write from Italy and I joined this active group because I was looking for information on how to identify the boot problem of my Apple IIe that I used when I was young.My first computer was the AIM-65 (the same 6502)I would like to know if anyone can help me identify the problem step by step.For now I am dealing with deep (very deep) cleaning.Here you see my idea of MoBo in the dishwasher at 65 ° C (with degreaser and detergent without rinse aid) and then in the oven at 45 * C for 8h.Isopropyl alcohol is very expensive now.

I have one Videx card, but the softwitch board is damaged, wires are broken and IDK which wire belongs on each pad, and the 16-pin header is missing one leg.

I could use a diagram for the card, to build another one; or a replacement softswitch kit. I have an AE 80 col card but it is absolutely filthy with some corrosion. I'm working on restoring it, but I have been a few days  at the task, and have more to go.