Apple II

Apple IIe -- IOU chip

Hi guys,

Trying to get my IIe working again, and get the following error on diag Boot....

IOU FLAG E5: 1 2 3 4 8

Looks like a problem booting with the IOU chip.

Anyone have a spare IOU chip they wouldn't mind sending my way?

Thanks,

David
Rochester NY (USA)

Forums: 

Apple 344-0010 IIe MMU IC

Hey guys.

A while ago, I had an Apple iie board fail on me and one of the problems was this chip.

Also, four capacitors were also busted.

I can get the capacitors but this chip is harder.

Does anyone have one laying around that they are willing to part with?

I'd be grateful.

Forums: 

Apple 2e not booting

Hi All,
I recently purchased an apple 2e computer, on first boot the logo did come up but then the power supply gave way.
Power supply has since had all the capacitors replaced and has come back to life, all voltages are spot on. But now I get a screen with horizontal lines on boot.
Does anyone have any ideas on what it could be?
I added a pic for reference.

Forums: 

Vote For Apple II

Question about Uthernet II

Is the Uthernet II supposed to be able to slide into the Apple // easily? I have an Enhanced Apple //e, and I haven't been able to get it in.

Thanks!

Forums: 

Europlus white box before Reset

After switch on I get a white box over the whole screen and need to press reset

Forums: 

Disk II Positioning Disk fault?

Disk II behaving odd, Positioning Disk spinning with out stopping!

Forums: 

solved

Forums: 

Bandinelli Software

According to the AE Phasor manual 1.1, there is
alisting for a game called Auto Gyro that uses
AE Phasor or I guess is Mockingboard compatible?

I have gone through asimov in the game section
to look for this particular game? Anybody herd of
it? Can supply screen shots etc.

Regards

Forums: 

VisiCalc DOS3.3.Launcher

I try to start VisiCalc from my CFFA with DOS3.3.Launcher (V 2.2) - the Launcher starts, but after a short moment the Apple IIe says:

]
90FB- A=00 x=07 Y=00 P=32 S=E9
*

With the "example" program that comes with the Launcher (Key Bored) it is no problem to start it from the CFFA.

I set the launch options using the DOS3.3.COPIER - tried both.

What could be the problem with VisiCalc?

Is VisiCalc using the auxiliary memory that the DOS3.3.Launcher needs by itself?
Or could the CFFA the problem?

Forums: 

Pages

Subscribe to Apple II