Apple II

CRT question

Hi all. So I found an old 17" Cybervision VGA CRT in my parents crawl space - it's been there many years obviously a damp space. It looks to be in good shape / the VGA connector screws did have rust though - I think I could clean it up with some contact cleaner. I plugged it in, turned it on and the screen showed no signal messsge BUT there was some crackling / ticking  noises which eventually stop. I did this several times and it seemed to happen less but still hear some.

Forums: 

Taxman by HAL labs

I am looking for an original disk version of Taxman c/w box and instructions for Apple IIe.  If anyone has one or knows of one,  please let me know.

Forums: 

BugByter disk Image

Hi Folks,

Can anyone help me find a DOS3.3 image of the BugByter software, I have done a decent search and it says it was in the Asimov repository here

Asimov/images/games/file_based/munch-a-bug_softstep_symbolsymon.dsk.gz

Has it moved? Is there anywhere else I could look or can somebody share it with me. Does anyone happen to know if you can set a breakpoint with it in EPROM?

Cheers

Youngie...

Forums: 

Problem z Apple IIe

I would like to say hello :)

I have a problem with apple iie. I have this image on the screen.

https://i.imgur.com/AIxqp61.jpg

https://i.imgur.com/ynNWoii.jpg

I checked the power supply. The voltages are correct.

I checked the capacitors. There are no short circuits.

Using the TL866 programmer, I checked the 74xxxxx circuits

The test failed: 74F09,74F10,74LS175,74LS74.. I replaced

Forums: 

booting off a DOS 3.3 floppy - what should that look like? I forget!

Some 40 years ago, I knew how to boot my Apple IIe and what it should sound and look like.  But I've forgotten.

Online sources suggest I insert the DOS 3.3 floppy, and then turn the computer on.  I did that... not much sound came from the floppy, except for the sounds of the media being rotated.  I waited a while (a minute, two minutes?) and finally something came up on screen.  This looked very unfamiliar; what does it mean?

 

Forums: 

Solutions for Multiple Disk IIs

Hi,

I've tried to search through old forum posts to see if anyone had suggestions for this and didn't have any luck. Does anyone know of a good solution for switching drive 1 between a Disk II and Floppy Emu without constantly opening up the top of the Apple II? Are there extension cables being sold anywhere? I know there's a switcher out there, but apparently it can damage the Emu in 5.25 mode. Any suggestions would be appreciated. 

Thanks!

Sam

Forums: 

Help fixing M&S Industries Sup'R'Terminal 80col

Does anyone know these cards ?

 

 

Forums: 

Looking for scanned image of Apple G090H monitor manual

Today I acquired a Apple IIC with a Apple G090H monitor. I've searched onlinc for a scanned image of the manual for the monitor, but I have not been able to locate one.  Does anyone have such an image, or do you have a manual that you can scan and post?

 

Thank you!

 

Forums: 

Contiki TelnetD error

Never mind - Telnet65 works 

Forums: 

Pages

Subscribe to Apple II