Apple II

My AppleSauce arrived last Friday

Submitted by jwg1962 on February 3, 2019 - 9:40am

Well, I put my name on the waiting list for this current run of AppleSauce units at KFEST and then when I got home I was toying with the idea of taking my name off the list. Boy, I am I glad I didn't!!!

 

Mine came on Friday and I installed the Sync Sensor (which is a piece of cake by the way) and cleaned up and lubed a newer looking Disk ][ I had, tested it, and it is working flawlessly.

 

Forums: 
Apple II

Apple II Europlus - Help getting it back to life!

Submitted by ExeCuteUK on February 2, 2019 - 7:54am

Hi, new to this forum and hope some of you guys could help me. I assume ill need to try and supply more information so please let me know any other details.

Basically I managed to dig my old Apple ii Euro out of the loft and before powering on had the power supply recapped. Output has been tested since and are near correct voltages.

I have today put the PSU back into the unit and powered on. The card in slot 7 is a PAL Modulator and when powered on the led on the slot 7 digitek card powers on.

Forums: 
Apple II

Is there an Apple II,+,e, flowchart/walkthough to determin problems??

Submitted by KLund1 on February 1, 2019 - 10:22pm

Is there a site or file or some such that someone can use to diagnose problems in a apple II or Plus, E, etc?

Some sort of thing that you check this thing first  them goto here if  this or there if that? Something kind of modern. not someting from Apple that might say 'replace main booard' if this fault occurs.

Forums: 
Apple II

Apple Color 100 - faulty brightness pot

Submitted by chris_perry on January 31, 2019 - 1:47pm

My Apple Color 100 works well, but the brightness pot seems to be faulty. The image is stable, but only at max brightness. Once I adjust the brightness down a bit it flickers and wavers a bit, then fades totally to black. If I fiddle with the knob I can get it back again, but it often is very finicky.

I welcome any thoughts on this. I haven't cracked it open yet -- it looks tricky to open, what with tabs and catches as well as the usual assortment of screws. I wonder, would that pot be a standard item?

 

 

Forums: 
Apple II

Will an NTSC Monitor II work with a PAL video signal?

Submitted by grandta13 on January 29, 2019 - 1:14am

I have an NTSC Monitor II (A2M2010), and I was curious if it could be safely used with European systems (Apple II or otherwise). Since color is not an issue, I was primarily concerned about how it would handle the increased resolution and lower refresh rate. I would just plug a PAL device into it, but I'm not well-enough versed on the subject to be sure that it wouldn't be damaged.

Forums: 
Apple II

What do you suggest using to reattach the latches on my Apple ][+

Submitted by chris_perry on January 27, 2019 - 4:21pm

It's a very nice and clean specimen so whatever I do, I want it to look good and work well. Should I use epoxy? It seems to me that normal superglue wouldn't be strong enough. Any advice is appreciated.

Forums: 
Apple II

Arithmetic Processor

Submitted by macnoyd on January 24, 2019 - 7:48pm

Does anyone here know anything about this board:  Arithmetic Processor AP-1.  It's an oldie.

I've had this for quite a while now and have virtually no information or software on it.

The photo here was taken off the web in my search but I have virtually the same board with a different S/N.

 

[UPDATE]

I found the manual to the board, but there is a program disk called " CCSOFT" that operates it.  If anyone

Forums: 
Apple II

Apple2Scans.net

Submitted by therelic on January 23, 2019 - 4:18pm

It appears that http://www.apple2scans.net has shut down.  Does anyone have the story behind the story?

Forums: 
Apple II

Apple IIc Drives won't read

Submitted by Slider on January 15, 2019 - 10:40am

Hey, first time posting here i recently picked up an apple IIc that was not working and spent the time fixing it.

I don't have a ton of history on the unit, it was in fairly good condition, when i opened it up it had a Z-RAM Ultra 1 inserted inbetween the MMU and CPU removing that got it to boot. Tested the RAM it works. 

Floppy drive is not working, at first it was not making the normal clicks I remember.

Checked drive, cleaned head, Lubed rails (lithium grease)

Forums: 
Apple II

New Production Apple IIgs 4 Mbyte DRAM Card

Submitted by Zane Kaminski on January 14, 2019 - 6:13pm

Hello everyone! My name is Zane, and this is my first post on the AppleFritter forum :). I'm posting to announce the coming availability of my 4 Mbyte Apple IIgs DRAM card, shown below:

Forums: 
Apple II

Pages

Subscribe to Apple II