Apple II

BBS 300 Baud

Submitted by 6502enhanced on April 8, 2016 - 7:31am

Hi,
does anyone have a phone number of an BBS that is still working and that I can reach with my 300 Baud Anderson Jacobson Acoustic Coupler?

Thanks

Forums: 
Apple II

Other than eBay

Submitted by VanguardFed on April 8, 2016 - 12:45am

Places to look for Apple II systems other than eBay?

Where have you found them before?

Is eBay overall the best place?

Forums: 
Apple II

Did Anyone Else Spot This?

Submitted by apple7159 on April 7, 2016 - 10:16pm

Did you see it?

Forums: 
Apple II

Proterm client for windows?

Submitted by skipper1947 on April 7, 2016 - 8:12am

This might be a dumb question, but I was wondering if there is a Proterm emulator for Windows? I guess it would actually be a telnet client that emulates Proterm display. Does that make sense? One would use it to connect via telnet to an Apple board and use Proterm screen control for display.

Forums: 
Apple II

Apple IIe -- IOU chip

Submitted by whynotpizza on April 6, 2016 - 5:12pm

Hi guys,

Trying to get my IIe working again, and get the following error on diag Boot....

IOU FLAG E5: 1 2 3 4 8

Looks like a problem booting with the IOU chip.

Anyone have a spare IOU chip they wouldn't mind sending my way?

Thanks,

David
Rochester NY (USA)

Forums: 
Apple II

Apple 344-0010 IIe MMU IC

Submitted by insanitor on April 5, 2016 - 2:08am

Hey guys.

A while ago, I had an Apple iie board fail on me and one of the problems was this chip.

Also, four capacitors were also busted.

I can get the capacitors but this chip is harder.

Does anyone have one laying around that they are willing to part with?

I'd be grateful.

Forums: 
Apple II

Apple 2e not booting

Submitted by yokomo on April 4, 2016 - 7:53pm

Hi All,
I recently purchased an apple 2e computer, on first boot the logo did come up but then the power supply gave way.
Power supply has since had all the capacitors replaced and has come back to life, all voltages are spot on. But now I get a screen with horizontal lines on boot.
Does anyone have any ideas on what it could be?
I added a pic for reference.

Forums: 
Apple II

Vote For Apple II

Submitted by 6502enhanced on April 4, 2016 - 3:59pm

Vote For The Apple II

Forums: 
Apple II

Question about Uthernet II

Submitted by Internetronic on April 3, 2016 - 12:12pm

Is the Uthernet II supposed to be able to slide into the Apple // easily? I have an Enhanced Apple //e, and I haven't been able to get it in.

Thanks!

Forums: 
Apple II

Europlus white box before Reset

Submitted by pfaraday on April 3, 2016 - 7:18am

After switch on I get a white box over the whole screen and need to press reset

Forums: 
Apple II

Pages

Subscribe to Apple II