Apple II

Micro Video Projector:The Perfect Apple //c+ Accessory

As it is the native resolution of Double Hi-Res graphics and 80 column text, this projector is perfect for helping to create the portable Apple //c+ unit. And at 10 full lumens!

Projector

Mutant Pie

Forums: 

need //e enhanced emblom or disk ][ drive #'s emblom

looking for a Apple //e Enhanced Emblem that goes over the power light indicator? This is the only thing that I have not been able to get , and this would complete my //e enhanced system , also I am looking for some original Disk ][ Drive #'s for my driver. If anyone has any or knows about where I can get any of these , any suggestions would be greatly appreciated.

Thanks.

Patrick.
A2forever

Forums: 

What's the difference betwee Apple II+.IIGS. IIe, IIc. and ///?

Okay, I've been a hard core Apple II/II+ and owned one since its initial sales in the 70's. But I am curious on wha are the differences between these models... II+.IIe. IIc. IIGS. and ///??

Thanks
-RocketScientists

Forums: 

What movies do you remember that showed an Apple ][ computer in it?

Can anyone name any old flicks that showed Apple ]['s in theme? I was cracking up the last night when I caught National Lampoon's Family Vacation , and in the opening part of the movie , it shows an Apple II PLUS sitting on a table , but if you look closely , theres no Monitor Cable hooked up! It does however show everything else , the II PLUS unit with the normal rainbow colored ribbon cable going to a Disk ][ Drive! Was neat seeing it in the movie , but rather odd when I took a second look again and noticed that it had no Monitor Cable going out of the II PLUS!

Forums: 

Keyboard buffer?

you guys remember this feature? I would be doing a long catalog of a disk and while it was cataloging , I was able to TYPE commands in , for example CATALOG , and it was like I had a keyboard buffer or something like that? I can't remember if it was a printer card like grapler or something like that that let me have extra buffer in memory to do this? If anyone remembers this can ya let me know? I would love to put something like that in one of my II+'s and get it working!

Thanks.

Patrick.
A2forever

Forums: 

Apple II/+ power indicator light fix

Awhile back I posted a question on where I could find a replacement bulb for the Apple II+ Indicator light.

Mike W had suggested usin a "Grain of Rice" or a "Grain of Wheat" type incadecent bulb.

Instead I used a white LED with a max current rating of 25mA. A Radio Shack item and a 100 Ohm resistor. This configuration only draws 16mA or roughly 1/6 the power of the original bulb.

The LED voltage drop was measured at 3.4 volts, so a 100 ohm resistor in series with this LED across the 5 volt power supplied, would limit the current rating to 16mA.

Forums: 

IIGS w/ null modem cable can send but not receive?

Hi folks --

I'm attempting to get my old IIGS (ROM01) system back up and running but am having an odd issue.

I have what I *think* is a null modem cable going from the IIGS' modem port to a serial-to-USB adapter on my OSX Mac. To be precise, I have a IIGS modem cable connected to a LapLink serial cable (which I've used as a null modem cable previously in other contexts), which itself then connects to the serial/USB adapter.

Forums: 

Want to use a NON-AUTOSTART F-8 ROM in a IIe or //e Enhanced System.

Ok everybody... I have been toying with this idea for some time now but have not been able to get any advice or direction on how to complete this idea. The idea is to use a NON-AUTOSTART F-8 ROM inside a //e or //e enhanced system. I already have the Eprom FILE for it , just need to know if it is supposed to burn on a 2716 EPROM or what? Since the //e's are so versitile as far as memory and other things go , this would be the Apple of choice when it comes to using a NON-AUTOSTART F-8 ROM!

Forums: 

About Apple IIGS keyboard short problem.

I tried to use my old-mac keyboard for Apple IIgs.
But there was keyboard cable short.
Apple IIgs doesn't boot up.

So I tried to find the fix method for this situation. And at last I found 1 article related to it.
(http://www.exforsys.com/forum/tech-faq/51582-apple-ii-csa2-faqs-2.html)

But actually I am a H/W novice. So I want to ask this.
Is there any more easy explanation to make inductor by hand?
I attatched the article for reference.

Forums: 

I have FingerPrint Plus and FingerPrint SS cards but no manual - can anyone help with switch settings etc?

Sorting through my collection of cards I found a number of FingerPrint printer cards made by Precision Software of Florida USA. Of the three versions I have (GSi, SS and Plus) I have only been able to find a manual (online) for the GSi. Can anyone help with information on the other two?

Forums: 

Pages

Subscribe to Apple II