Apple II

apple IIc power adapter and cord - pinout needed

Submitted by capybara on May 18, 2008 - 2:47pm

do you have a pinout of the apple IIc power adapter connector - 7 pins ?
i need it to rig a 12volt supply for my IIc.

Forums: 
Apple II

Any user groups for UK/European users of Apple IIs?

Submitted by arukum17 on May 18, 2008 - 12:15pm

Some things are specific to UK users: voltages, PAL, local sources for spare parts etc etc - are they groups for UK/European users?

Forums: 
Apple II

Where can I find a spare Apple II Europlus power supply?

Submitted by arukum17 on May 18, 2008 - 9:24am

Any suggestions/ online classifieds would be helpful - am prepared to pay international shipping to the UK if needed...
I have not found anything on ebay yet

Forums: 
Apple II

Where can I find a replacement Apple II power supply?

Submitted by arukum17 on May 18, 2008 - 5:58am

Preferably of the type with serial number A2M001

Forums: 
Apple II

My Apple II will not turn on :-(

Submitted by arukum17 on May 17, 2008 - 12:22pm

I am using a voltage transformer on an original Apple II but it will not turn on.
Have tried 50 watts and 100 watts but niether work. The 50 watt tranformer gives a humming noise on the internal Apple power supply.
I have a multimeter which shows a voltage output of 120VAC from the 100 watt transformer.

Any suggestions?

Forums: 
Apple II

Is a voltage transformer with a max load of 30 VAC, OK for an Apple II ?

Submitted by arukum17 on May 16, 2008 - 2:46am

Sorry for the repeat posting but I am stuck.

I have to use a transformer to change my UK voltage of 240V to an US voltage of 120V so that I can use my Apple II (non plus)
The transformer is rated 60Hz and as having a maximum load of 30 volt-amps. Is this OK for an Apple II power supply or will I run into problems.

Thanks

Arun (Apple ][ 1979)

Forums: 
Apple II

Dumb question please: Power load requirement for an Apple II with one disk drive and a few cards

Submitted by arukum17 on May 15, 2008 - 2:42am

A new user from the UK seeks your help:

I have to use a transformer to change my UK voltage of 240V to an US voltage of 120V so that I can use my Apple II (non plus)
The transformer is rated as having a maximum load of 30 volt-amps. Is this OK for an Apple II power supply or will I run into problems.

Wanted to double check before I goofed up royally!
Sorry if the question is a dumb one.

Arun

Forums: 
Apple II

A great dumpster dive, but now I have questions!

Submitted by knexkid on May 14, 2008 - 7:35pm

Hi,
Today I was out and about, and I was able to rescue an old Apple II GS out of the trash! I was able to fire it up and it tries to boot from the floppy drive, but says no boot device. It has a monitor, 3.5", and 5" floppy disk drives. I have two questions (Sorry, I have no experience with Apple computers):

1. I have no input for it. Do I need a special keyboard or mouse. Where can I get one? Can I use my standard PS/2 keyboard?

Forums: 
Apple II

adtpro not working

Submitted by dukbrand on May 14, 2008 - 5:45pm

i'm attempting to use it through the cassette ports on my two plus but i keep getting "GARBAGE RECEIVED FROM HOST" message
i followed the boot strapping instructions to the point of trying to make a disk copy and it won't let me recieve.

Forums: 
Apple II

Pages

Subscribe to Apple II