Apple II

Graphic printing with printshop and okidata problem

Submitted by NovellNetware on December 22, 2019 - 11:30pm

Configuration:

Apple II+

Orange Graphler Plus

Okidata ML 82A

 

1. So I didn't think any of the dip switches got change on the printer card or printer.

2. I was able to print from Apple write just fine. So I have decided to do something I have never done before on a apple II plus.

3. Print shop and graphics.

4. Test printing. First only printed Welco. Then I tried another disk image and it printed welcome to printshop.

5. Problem All the lines are spaced like auto LF is on after CR.

 

Forums: 
Apple II

Apple IIc Plus video problem

Submitted by phoenix1031 on December 21, 2019 - 9:34am

Hello, I recently got this apple IIc Plus. When I turn it on, the screen shows characters in red/blue color instead of white.

It sometimes shows white characters, but after a few seconds, it switches back.

How can I fix this? Please help me.

Forums: 
Apple II

Apple ][ Slot 3 video card with HDMI output

Submitted by barryhills on December 17, 2019 - 5:03pm

I'm exhausted trying to integrate the piece parts needed to get VGA on my Apple ][e  

 

Instead of my non-working solution outlined below has anyone done a HDMI video card for Slot 3 (IE an "80 column card")?

 

what I have now is .....

 

vga monitor

^

GBS 8220 (VGA)

^

BIT-C128 DAC (RGB)

^

IBM CGA (digital)

^

Color Link Card from Applied Engineering

^

Ramworks 3 Card from Applied Engineering

^ 

AUX Slot

Forums: 
Apple II

Strange formating / adtpro issue.

Submitted by NovellNetware on December 16, 2019 - 9:40pm

I don't know if I have a bad drive or disk to old or what.

 

So when I got the apple back in July it would not boot off of any disks. After a cleaning. It stated working like a champ. So I used the same disks over and over again and then they stopped working. These disks you could see now was worn out with groves it in. No problem vintage 1980's disks. So I decide to grab some more disks. A good old original disk would boot just fine. A true blue apple disk.

Forums: 
Apple II

Boot Menu System available for guests?

Submitted by dayoff on December 14, 2019 - 9:33pm

Hi all,

 

Forums: 
Apple II

Apple ii plus 's' key not working

Submitted by talos on December 14, 2019 - 3:11pm

Hello everyone!

 

Forums: 
Apple II

Intermittent failure to boot, sometimes good, sometimes not

Submitted by Ratso222 on December 12, 2019 - 4:38pm

I am attempting to resurrect an Apple ][e that has been stoted in a box. It looks fine, no mold, no dampness. It has 2 Apple 5.25 floppies.

Forums: 
Apple II

Just picked this up. Hopefully it is all good.

Submitted by NovellNetware on December 11, 2019 - 11:22pm

I hope this is legit auction. I just picked this up tonight on e-bay. I'll give everybody the 411 for it. The plan is Take the disk drive, time clock (yes I see the leaky batteries), keyboard, joystick, ram factor and if good the system saver maybe. The cards I don't need is the 16k expansion card, the 80 column card, On a side note for the keyboard. I don't really need it. Just a working one for my apple ii. So anyway. I'll be selling the extra parts to recoup the money. Normally. I can offer it as it not powered on, I can test it and I can do all three.

Forums: 
Apple II

Bad Unidisk 5.25 analog board.

Submitted by Lee Adamson on December 10, 2019 - 9:52pm

I have a rev 2 unidisk analog board (it's actually out of an Apple Drive 5.25, but I guess they used the same board as the later-rev unidisk).

 

The disk head won't move.  I replaced the board with the same rev board out of an actual Unidisk to fix the problem, but now I want to try to fix this one, as there's nothing wrong with the mechanism of the Unidisk that I stole the working board from.  The enclosure is just really yellowed.

 

Forums: 
Apple II

Apple II/II+ keyboard mounting holes

Submitted by dfnr2 on December 9, 2019 - 9:33pm

Does anyone have accurate measurements of the mounting hole pattern for the Apple II/II+ keyboard? I am finalizing a keyboard design and want to make sure it fits properly in an Apple II.Many thanks,Dave

 

Forums: 
Apple II

Pages

Subscribe to Apple II