Apple II

ADT transfer question , using high speed usb adapter to laptop.

Submitted by A2forever on August 18, 2008 - 8:34am

hey guys.... I have a ADT question for you , been awhile since I got back into transfering stuff again , but here's the situation.... I have a //e coming from a super serial card , with a nullcable connected to a high speed usb connector . I installed the drivers for the usb connector that I got from www.retrofloppy.com . I am able to send floppys from the //e to the PC , but when I try to transfer a .DSK file from the PC to the //e , it gives errors that it cannot open the file.

Forums: 
Apple II

Apple /// startup memory diagnostic error?

Submitted by cxcheng on August 17, 2008 - 11:04am

When I tried to power up my Apple /// (built in 1980) with 256K RAM, the screen showed "memory diagnostics" and stopped there. There was a mix of 1s and 0s on it. Not sure what that means, but it doesn't look good because of the mix.

Forums: 
Apple II

ALF Music synthesizer

Submitted by rhyre on August 15, 2008 - 11:57pm

I'm looking for details on the ALF Music system card, for an Apple ][,
from about 1978.

If anyone has one they no longer want/need, I can provide a home for it.

If I recall correctly, this was a 3-voice card using an early AY-8910
sound chip.

- Ralph

Forums: 
Apple II

Delete key doesn't work (?)

Submitted by alexhanson on August 14, 2008 - 1:02am

I am new to the Apple II scene, so I'm not sure what to expect out of the systems, but for the life of me I can't figure out how to clear a character off my screen!

I turn on my Apple II and press Control+Reset. At the prompt, I type in some characters. Pressing delete just prints a square grid cursor.

When I'm in ADTPro, the delete key moves the cursor to the right, but doesn't delete the character. If the default name for a disk is "BLANK" and I want to call it "GAME" there's no way to get that ending "K" deleted (the rest of the characters can be overwritten).

Forums: 
Apple II

//c repair

Submitted by kwc on August 12, 2008 - 7:01pm

Picked up a non-working //c. Powers up but no disk access, lots of garbage on the screen.

Anyone know someone who can repair this ?

Forums: 
Apple II

Apple IIc shows no color on screen

Submitted by Bender on August 8, 2008 - 3:50pm

Hello Friends of the good Apple II,

i have obtain a Apple IIc and i get no colour picture on screen. We have here PAL TV Standard. I tried the Pal Modulator with the 15 Pin Connector and through the RCA Connector. I get all times only a b/w picture without any colour. What can i do? My TV supports NTSC and PAL. I thought that it maybe a NTSC Apple IIc but the Label says 220-240 Volt, so i guess thats a PAL type.

Forums: 
Apple II

Using an Apple II as a serial terminal with a Windows machine

Submitted by Lancaster on August 8, 2008 - 12:23pm

A few people out there have set up their Apple II machines as serial terminals to UNIX/Linux boxes:

http://dataswamp.net/apple2eserialterm/#serialterm

I would like to do this with a Windows box, but am unsure about the Windows side of the configuration. Has anyone out there tried this? Can you recommend any good serial console programs for Windows?

Forums: 
Apple II

Apple II golden power supply switches off after 2 minutes

Submitted by arukum17 on August 8, 2008 - 9:02am

My Apple II+ (golden) power supply can switch on my Apple II (non-plus) just fine.
However after 2-3 minutes it powers off. The only cards I have attached are a 16K memory expansion and a Disk ][ drive controller.

A replacement power supply does not suffer from this problem.

Any thoughts on what might be wrong?

Forums: 
Apple II

Looking for Bootlegger Magazine Floppies , to start collection.

Submitted by A2forever on August 8, 2008 - 5:26am

hi... looking for any and all copies of The Bootlegger Magazine , this was an awsome set of Floppies back in the day , it was a monthly publication that was sent out to members only , dealt alot with de-protection and what not of Apple II software , would like to get as many of the floppies as possible , so I can transfer them to .DSK before they are gone forever , I already did a huge collection Hardcore Computist Magazine , I have the collection if anyone is interested in that.

Forums: 
Apple II

Need an Apple II Expert who knows CAD!!

Submitted by lpp71 on August 7, 2008 - 12:02am

Well, I just got a loan from the bank, and I am looking for people who know a lot about the Apple II's, CAD programs, and creating PCBs. I'd like to make 'aftermarket' parts from the Apple II's increasing there power, I've been in love with the Apple IIgs I've had for years, and finally got approved for the funding, if anyone here can help... Or at least point me to the right direct at least.

To anyone that can help I can offer to pay outright or royalties. I know a fair amount, but less then I thought, lol.

Thanks in advance guys!

Forums: 
Apple II

Pages

Subscribe to Apple II